Tag: M.W:100-200

37441-50-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,2-Thiazinane 1,1-dioxide, cas is 37441-50-2,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

A flask was charged under nitrogen with 1,1-dimethylethyl 3-bromo-5-iodobenzoate (D7)(1 g, 2.6 mmol, 1 equiv), Cs2CO3 (1.26 g, 3.9 mmol, 1.5 equiv),tris(dibenzylideneacetone)dipalladium(0) (12 mg, 0.013 mmol, 0.005 equiv), Xantphos (22 mg, 0.038 mmol, 0.015 equiv) and toluene (20 ml). Tetrahydro-2H-1,2-thiazine 1,1-dioxide (D6) (350 mg, 2.9 mmol, 1.1 equiv) was then added and the resulting mixturewas stirred at 100C for 16 h then cooled to room temperature and diluted with AcOEt.The organic phase was washed with saturated aqueous NaHCO3 solution, dried overMgSO4 and concentrated in vacua. The residue was triturated with Et2O to give 1,1-dimethylethyl 3-bromo-5-(1,1-dioxidotetrahydro-2/-/-1,2-thiazin-2-yl)benzoate (D8) (590mg, 58%) as a white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,2-Thiazinane 1,1-dioxide, 37441-50-2

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/111022; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

37441-50-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,2-Thiazinane 1,1-dioxide, cas is 37441-50-2,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

To a mixture of 2,4-difluorobenzonitrile (10.0 g, 72 mmol) and 1,1-dioxo-1lambda6-[1,2]thiazin-2-ane (8.84 g, 65.4 mmol) in 1:1 tetrahydrofuran/dimethylformamide (40 mL) was added potassium carbonate (9.0 g, 65.4 mmol). The mixture was stirred at 90 C. for 18 h then filtered and concentrated. The residue was purified by flash chromatography (SiO2) eluting with 10%-50% ethyl acetate/hexanes followed by recrystallization from hot ethyl acetate/hexane to give the title compound as white needles (0.537 g, 3% yield). 1H NMR (500 MHz, CD3OD) delta ppm: 7.70 (1H, dd, J=8.8, 5.8 Hz), 7.30 (1H, dd, J=8.8, 2.4 Hz), 7.15-7.12 (1H, m), 3.27 (2H, t, J=5.3 Hz), 3.33 (2H, t, J=6.1 Hz), 2.40-2.35 (2H, m), 2.05-2.01 (2H, m). LCMS (M+H) calcd for C11H16N2OF: 255.06; found: 255.19.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,2-Thiazinane 1,1-dioxide, 37441-50-2

Reference£º
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

37441-50-2 A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Intermediate 524-Fluoro- 2-(l,l-dioxo-llambda6-[l,2]thiazinan-2-yl)benzonitrile: To a solution of l,l-dioxo[l,2]thiazinane (8.84 g, 65.4 mmol) in DMF (20 mL) and THF (10 mL) was added portion-wise sodium hydride (1.65 g, 65.5 mmol, 95%). After stirring for 30 min, 2,4-difluorobenzonitrile (10.0 g, 72 mmol) was added and the mixture was stirred at 90 C for 2.5 h. The mixture was cooled and concentrated and the residue was purified by flash chromatography eluting with 0%-l 0% EtOAc/hexane to give the title compound as white needles (1.37 g, 8% yield). 1H-NMR (500 MHz, CDCl3) delta: 7.70 (IH, dd, J= 8.8, 5.8 Hz), 7.30 (IH, dd, J= 8.8, 2.4 Hz), 7.15-7.12 (IH, m), 3.72 (2H, t, J= 5.3 Hz), 3.33 (2H, t, J= 6.1 Hz), 2.40-2.35 (2H, m), 2.05-2.01 (2H, m). LCMS [M+H]+ calcd for C11H12N2FO2S: 255.06; found: 255.19.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,2-Thiazinane 1,1-dioxide,37441-50-2,its application will become more common.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/58646; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

Step2 A strong glass tube was charged with Pd2(dba)3 (6.4 mg; 0.007 mmol), xantphos (12 mg; 0.02 mmol), 1,2-thiazinane-1,1-dioxide (115 mg; 0.85 mmol), and Cs2CO3 (323 mg; 0.99 mmol).The tube was capped with a rubber septum, evacuated and backfilled with nitrogen. 6-Bromo-1-methyl-1H-indole carboxylic acid ethyl ester (200 mg; 0.71 mmol) in 1 ml of 1,4-dioxane was added through the septum.The septum was replaced with a Teflon screwcap.The tube was sealed, and the mixture was stirred at 100 C. for 64 hours.The reaction mixture was cooled to room temperature, diluted with ethyl acetate (10 ml), filtered, and concentrated in vacuo.The crude material was purified by flash chromatography (silica gel, ethyl acetate-hexane 1:1) to afford 190 mg (66%; m/z 337) of colorless crystals.This compound was dissolved in a mixture of tetrahydrofuran (4 ml), methanol (2 ml) and water (1 ml).To this solution was added dropwise LiOH monohydrate (95 mg; 2.26 mmol) dissolved in 1 ml water and the mixture was stirred at room temperature for 16 h.The reaction mixture was partition between ethyl acetate and water.The aqueous layer was acidified with 2N HCl to ph ~3-4 and extracted with ethyl acetate.The organic layer was washed with brine and dried (Na2SO4) and evaporated in vacuo.Yield 131 mg of 6-(1,1-Dioxo-1lambda6-[1,2]thiazinan-2-yl)-1-methyl-1H-indole-2-carboxylic acid as a white powder (75%); m/z 307., 37441-50-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37441-50-2,1,2-Thiazinane 1,1-dioxide,its application will become more common.

Reference£º
Patent; Bamberg, Joe Timothy; Gabriel, Tobias; Krauss, Nancy Elisabeth; Mirzadegan, Taraneh; Palmer, Wylie Solang; Smith, David Bernard; US2004/77646; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

(39) A mixture of 5-chloro-N-((1-(4-iodophenyl)-1H-imidazol-4-yl)methyl)thiophene-2-carboxamide 1-6 (56 mg, 0.10 mmol), 1,4-butanesultam (52 mg, 0.38 mmol), 8-hydroxyquinoline (6 mg, 0.040 mmol) and K2CO3 (50 mg, 0.36 mmol) in DMSO (1 mL) was degassed before being charged with CuI (10 mg, 0.052 mmol). The mixture in a sealed tube was heated at 130 C. overnight. The mixture was then purified by HPLC to give the titled compound (10 mg). MS 451.1 and 453.1 (M+H, Cl pattern)., 37441-50-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37441-50-2,1,2-Thiazinane 1,1-dioxide,its application will become more common.

Reference£º
Patent; Millennium Pharmaceuticals, Inc.; US2007/259924; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

Part E 7-Bromo-2-ethoxymethyl-1-(3-isopropoxypropyl)-1FI imidazo[4,5-c]quinolin-4- amine (0.75 g), 1,4-butanesultam (0.29 g), copper (I) (68 mg), (No.)-trans-1,2- diaminocyclohexane (42 muL), potassium phosphate (0.79 g) and dioxane (4 mL) were added to a scintillation vial. The vial was flushed with nitrogen, sealed with a Teflon- lined cap, placed in an oil bath, and heated at 110 C for 30 hours. The reaction was cooled to ambient temperature, diluted with chloroform and filtered through a bed of CELITE filter agent. The solvent was evaporated and the residue was purified by column chromatography on a Biotage HorizonNo. High-Performance Flash Chromatography instrument using a silica gel cartridge. The polar component of the eluent was chloroform:methanol:ammonium hydroxide 80:18:2 (CMA). The purification was carried out eluting with chloroform: CMA in a gradient from 99: 1 to 90: 10. Additional purification by recrystallization from acetonitrile provided 0.47 g of 7-(1,1-dioxo- [1,2]thiazinan-2-yl)-2-ethoxymethyl-1-(3-isopropoxypropyl)-1H imidazo[4,5-c]quinolin- 4-amine as pale yellow crystals, mp 172-174 C., 37441-50-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,2-Thiazinane 1,1-dioxide,37441-50-2,its application will become more common.

Reference£º
Patent; 3M INNOVATIVE PROPERTIES COMPANY; WO2005/123080; (2005); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

solution of 2-(3-chloro-4-fluorobenzyl)-8-ethyl-4-fluoro-10-methoxy-6-methyl-7,8- dihydropyrazino[l’,2′: 1,5]pyrrolo[2,3-d]pyridazine-1,9(2H,6H)-dione (0.10 g, 0.23 mmol; Example 139), 1,2-thiazinane 1,1-dioxide (45 mg, 0.33 mmol), and cesium carbonate (0.15 g, 0.46 mmol) in anhydrous DMSO (9.5 mL) was heated in an oil bath at 50 C for 5 hours. The product mixture was filtered through a pad of Celite and the filtrate was subjected to purification on reverse phase preparative HPLC purification. Collection and lyophilization of appropriate fractions afforded the title material. Analytical HPLC indicated that the product is a 1:1 mixture of two isomers that arose from the relative stereochemistry of the 6-methyl group and restricted rotation between the sultam ring and the tricyclic core. ?H NMR (400 MHz, CDCI3) No. 7.48 (m 1H), 7.28 (m, 1H), 7.11 (t, J = 8.5 Hz, 1H), 5.17 (d, J = 14.2 Hz, ?H), 5.34 (in, 1/2 H), 5.29 (d, J = 14.2 Hz, (at)H), 5.23 (d, J = 14.2 Hz, ?H), 5.09 (d, J = 14.2 Hz, ?H), 5.07 (m, ?H), 4.18 (s, 1.5H), 4.16 (s, 1.5H), 4.12-3.17 (m), 2.58-2.00 (m), 1.57 (d, J = 6.6 Hz, 1.5H), 1.42 (d, J = 6.8 Hz, 1.5H), 1.23 (t, J = 6.8 Hz, 1.5H), 1.22 (t, J = 7.1 Hz, 1.5H). ES MS M+1 = 552

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,2-Thiazinane 1,1-dioxide,37441-50-2,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2005/110414; (2005); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

A stirred mixture of methyl 6-BROMO-3-HYDROXYPYRIDINE-2-CARBOXYLATE (6.15 g, 26.5 mmol), 8-sultam (described in WO 02/30931-A2, Merck & Co. , Inc. , 2002) (3. 98 g, 29.4 mmol) and copper (I) oxide (5.75 g, 40.2 mmol) in anhydrous pyridine (100 mL) was heated at 130 C, under argon, for 6 h. The mixture was cooled, and the pyridine removed under reduced pressure. The residue was treated with CH2C12 (400 mL) and EDTA (0.35 M in H20, 300 ML, 105 mmol) and air was bubbled into the mixture for 18 h. The mixture was filtered through a pad of celite and the aqueous layer was saturated with solid NACI and extracted with CH2CLZ (4 x 250 mL). The combined organic extracts were dried (NA2S04), filtered, and concentrated in vacuo to afford a crude oil. The oil was dissolved in MEOH (400 mL) and conc. H2S04 (2 ML) and heated to reflux for 18 h, then allowed to cool to ambient temperature. Most of the solvent was removed in vacuo and the residual mixture was partitioned between CHZCLX (400 mL) and saturated NAHCO3 (400 mL). The aqueous layer was extracted further with CH2Cl2 (2 x 250 mL) and the combined organic extracts were dried (NA2S04), filtered, and concentrated in vacuo to afford a crude sample of the product. This crude product was partially purified by silica gel chromatography, eluting with a gradient of CH2C12 : MEOH-100 : 0 to 95: 5 to give a yellow solid that was crystallized from MEOH to afford the title compound as a pale yellow solid of sufficient purity for use in the next step. MS: FALZ = 287 (M + 1).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,2-Thiazinane 1,1-dioxide,37441-50-2,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2005/9962; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3080-99-7 A common heterocyclic compound, 3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

In a manner similar to the method described in Example 1-1, using 3,4-dihydro-2H-benzo[1,4]thiazine in place of 1,2,3,4-tetrahydroquinoline, 239 mg (yield: 63%) of the captioned compound was obtained.1H-NMR (ppm) (300 MHz, CDCl3) 6.98 (1H, dd, J = 1.8, 7.9 Hz), 6.86 (1H, ddd, J = 1.8, 7.3, 8.5 Hz), 6.78 (1H, d, J = 8.2 Hz), 6.69-6.65 (2H, m), 6.61-6.5 (1H, ddd, J = 1.2, 7.6, 8.5 Hz), 4.61 (1H, d, J = 8.2 Hz), 3.85 (3H, s), 3.60-3.51 (3H, m), 3.14-2.96 (4H, m), 2.55-2.50 (1H, m), 2.41 (3H, s), 2.38-2.32 (1H, m), 2.23-2.12 (2H, m), 1.91-1.47 (5H, m), 1.12-1.00 (1H, m) IR (cm-1) (KBr) 2924, 1735, 1606, 1584, 1483, 1438, 1373, 1338, 1275, 1257, 1176, 1148, 1112, 1079, 1047, 1006, 937, 907, 891, 854, 793, 744

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine,its application will become more common.

Reference£º
Patent; TORAY INDUSTRIES, INC.; EP1555266; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

solution of 2-(3-chloro-4-fluorobenzyl)-8-ethyl-4-fluoro-10-methoxy-6-methyl-7,8- dihydropyrazino[l’,2′: 1,5]pyrrolo[2,3-d]pyridazine-1,9(2H,6H)-dione (0.10 g, 0.23 mmol; Example 139), 1,2-thiazinane 1,1-dioxide (45 mg, 0.33 mmol), and cesium carbonate (0.15 g, 0.46 mmol) in anhydrous DMSO (9.5 mL) was heated in an oil bath at 50 C for 5 hours. The product mixture was filtered through a pad of Celite and the filtrate was subjected to purification on reverse phase preparative HPLC purification. Collection and lyophilization of appropriate fractions afforded the title material. Analytical HPLC indicated that the product is a 1:1 mixture of two isomers that arose from the relative stereochemistry of the 6-methyl group and restricted rotation between the sultam ring and the tricyclic core. ?H NMR (400 MHz, CDCI3) No. 7.48 (m 1H), 7.28 (m, 1H), 7.11 (t, J = 8.5 Hz, 1H), 5.17 (d, J = 14.2 Hz, ?H), 5.34 (in, 1/2 H), 5.29 (d, J = 14.2 Hz, (at)H), 5.23 (d, J = 14.2 Hz, ?H), 5.09 (d, J = 14.2 Hz, ?H), 5.07 (m, ?H), 4.18 (s, 1.5H), 4.16 (s, 1.5H), 4.12-3.17 (m), 2.58-2.00 (m), 1.57 (d, J = 6.6 Hz, 1.5H), 1.42 (d, J = 6.8 Hz, 1.5H), 1.23 (t, J = 6.8 Hz, 1.5H), 1.22 (t, J = 7.1 Hz, 1.5H). ES MS M+1 = 552, 37441-50-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37441-50-2,1,2-Thiazinane 1,1-dioxide,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2005/110414; (2005); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem