Day: November 9, 2020

188614-01-9,A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step 1. Borane-tetrahydrofuran complex solution (1 M in tetrahydrofuran, 45 mL, 45 mmol) was added at 0 C. to a suspension of methyl-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (2.00 g, 8.96 mmol) in tetrahydrofuran (20 mL). The ice bath was removed, the homogenous solution stirred at room temperature for 2 h, then excess reagent was destroyed by careful addition of methanol (42 mL) at 0 C. After evaporation of volatile material, the residue was taken up in 5% methanolic sulfuric acid solution (25 mL) and the solution was heated at reflux over 80 min. After cooling, the reaction mixture was partitioned between ethyl acetate and water, the organic layer was dried (MgSO4) and evaporated to produce 3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (1.79 g, 96%). Light yellow solid, MS (ISP)=210.1 (M+H)+., 188614-01-9

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 188614-01-9 reaction routes.

Reference£º
Patent; Ackermann, Jean; Bleicher, Konrad; Ceccarelli, Simona M.; Chomienne, Odile; Mattei, Patrizio; Sander, Ulrike Obst; US2007/191603; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

188614-01-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, it is a common compound, a new synthetic route is introduced below.

A. (3,4-Dihydro-2H-benzo[1,4]thiazin-6-yl)-methanol. To a solution of 3-oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (750 mg, 3.4 mmol) in Et2O (32 mL) was added LiAlH4 (240 mg, 6.3 mmol) and the resulting suspension was stirred at RT for 24 h. The reaction mixture was cooled to 0 C. and treated with H2O (0.5 mL), 15% aq. NaOH (0.5 mL), and H2O (1.5 mL). The resulting suspension was filtered. The filtrate was concentrated to provide 340 mg (58%) of the title compound as an amber oil. MS (ESI): exact mass calculated for C9H11NOS, 181.06; m/z found, 182.1 [M+H]+. 1H NMR (500 MHz, CDCl3): 6.96 (d, J=7.9, 1H), 6.60 (dd, J=7.9, 1.6, 1H), 6.49 (d, J=7.9, 1H), 4.52 (s, 2H), 3.65-3.62 (m, 2H), 3.06-3.04 (m, 2H)., 188614-01-9

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 188614-01-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Allison, Brett D.; Gomez, Laurent; Grice, Cheryl A.; Hack, Michael D.; Morrow, Brian J.; Motley, S. Timothy; Santillan, Alejandro; Shaw, Karen J.; Schwarz, Kimberly L.; Tang, Liu Y.; Venkatesan, Hariharan; Wiener, John J. M.; US2006/223810; (2006); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-(Trifluoromethyl)-10H-phenothiazine,92-30-8, This compound has unique chemical properties. The synthetic route is as follows.,92-30-8

A solution of2- (trifluoromethyl)-lOH-phenothiazine (2.04g, 7.6mmol) and DMF (16mL) was mixed with CS2C03 (7.5g, 22.9mmol) and l-bromo-3-chloropropane (1.1 mL, 11.5mmol). The reaction mixture was heated at 65 C for 12h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi l00mL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSO iota, and concentrated to afford the title compound.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 92-30-8.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.92-30-8,A new synthetic method of this compound is introduced below.92-30-8

92-30-8, General procedure: To a solution of hydroxy compounds, sulfhydryl compounds oramino compounds (1.0 eq) and propargyl bromide (1.2 eq) inacetone (20 ml) was added NaOH (1.5 eq), the mixturewas refluxedfor about 6 h. Upon completion, the residue was purified withcolumn chromatography (hexane:EtOAc 7:1) to obtain analogue13a~13m. Sulfonyl chlorides (1.0 eq) and propynylamine (1.2 eq) inCH2Cl2 (20 ml) was added Et3N (1.5 eq), the mixture was stirred atroom temperature for about 6 h. Upon completion, the residue waspurified with column chromatography (hexane:EtOAc 9:1) toobtain analogue 13n~13o.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Article; Fu, Dong-Jun; Li, Ping; Wu, Bo-Wen; Cui, Xin-Xin; Zhao, Cheng-Bin; Zhang, Sai-Yang; European Journal of Medicinal Chemistry; vol. 165; (2019); p. 309 – 322;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

38642-74-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.38642-74-9,2-Cyano-phenothiazine, it is a common compound, a new synthetic route is introduced below.

2-cyanophenothiazine (0.74 g, 3.30 mmol) was dissolved in 10 mL of anhydrous DMF. The mixture was cooled to 0 C and 60 % NaH (0.40 g, 9.90 mmol) was added. The dark mixture was stirred at 0 C for an additional 15 mm and Di-tert-butyl dicarbonate (0.90 g, 3.96 mmol) was added. The mixture was stirred at room temperature for 3 h and was diluted with 50 mL of brine. The aqueous layer was extracted with three 25 mL portions of ethyl acetate. The combined organic extract was dried over anhydrous MgSO4 and concentrated under diminished pressure. The crude was purified on a silica gel column (10 cm x 2 cm). Elution with ethyl acetate-hexane (1:9) gave 1 as a pale yellow solid: yield 1.07 g (100%); silica gel TLC R10.26 (ethyl acetate-hexane 1:9); ?HNIVIR (CDC13) 51.49 (s, 9H), 7.16-7.20 (m, 1H), 7.28-7.33 (m, 2H), 7.40 (s, 2H), 7.49 (d, 1H, J= 8.4 Hz) and 7.80 (s, 1H); ?3CI?IvIR 28.1, 83.1, 110.2, 118.2, 126.6, 127.2, 127.3, 127.5, 128.1,129.1, 130.3, 130.6, 137.7, 139.0, 139.1 and 151.8; mass spectrum (APCI), m/z 325.1017 (M+H) (C18H17N202S requires m/z 325.1011).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 2-Cyano-phenothiazine reaction routes.

Reference£º
Patent; ARIZONA BOARD OF REGENTS ON BEHALF OF ARIZONA STATE UNIVERSITY; HECHT, Sidney; KHDOUR, Omar; CHOWDHURY, Sandipan, Roy; BANDYOPADHAY, Indrajit; (85 pag.)WO2016/133995; (2016); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.92-30-8,A new synthetic method of this compound is introduced below.92-30-8

92-30-8, Compound 2; 10-(3-Chloropropyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethyl phenothiazine (compound 1) (2g, 7.49 mmol) and sodium hydride (0.5 g, 10.42 mmol) in dry toluene (30 mL) was added l-bromo-3-chloropropane (1.57g, 10 mmol). The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice- water mixture, the crude product was extracted with ethyl acetate (3×50 mL) and the combined organic phase dried over anhydrous sodium sulphate. Final purification was performed by column chromatography (9:1 hexane: ethyl acetate) on silica gel to give 10-(3- chloropropyl)- 2-trifluoromethylphenothiazine (1.5 g, 58% ) as a solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

38642-74-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.38642-74-9,2-Cyano-phenothiazine, it is a common compound, a new synthetic route is introduced below.

2-cyanophenothiazine (0.74 g, 3.30 mmol) was dissolved in 10 mL of anhydrous DMF. The mixture was cooled to 0 C and 60 % NaH (0.40 g, 9.90 mmol) was added. The dark mixture was stirred at 0 C for an additional 15 mm and Di-tert-butyl dicarbonate (0.90 g, 3.96 mmol) was added. The mixture was stirred at room temperature for 3 h and was diluted with 50 mL of brine. The aqueous layer was extracted with three 25 mL portions of ethyl acetate. The combined organic extract was dried over anhydrous MgSO4 and concentrated under diminished pressure. The crude was purified on a silica gel column (10 cm x 2 cm). Elution with ethyl acetate-hexane (1:9) gave 1 as a pale yellow solid: yield 1.07 g (100%); silica gel TLC R10.26 (ethyl acetate-hexane 1:9); ?HNIVIR (CDC13) 51.49 (s, 9H), 7.16-7.20 (m, 1H), 7.28-7.33 (m, 2H), 7.40 (s, 2H), 7.49 (d, 1H, J= 8.4 Hz) and 7.80 (s, 1H); ?3CI?IvIR 28.1, 83.1, 110.2, 118.2, 126.6, 127.2, 127.3, 127.5, 128.1,129.1, 130.3, 130.6, 137.7, 139.0, 139.1 and 151.8; mass spectrum (APCI), m/z 325.1017 (M+H) (C18H17N202S requires m/z 325.1011)., 38642-74-9

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 38642-74-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; ARIZONA BOARD OF REGENTS ON BEHALF OF ARIZONA STATE UNIVERSITY; HECHT, Sidney; KHDOUR, Omar; CHOWDHURY, Sandipan, Roy; BANDYOPADHAY, Indrajit; (85 pag.)WO2016/133995; (2016); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

37441-50-2,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1,2-Thiazinane 1,1-dioxide,37441-50-2, This compound has unique chemical properties. The synthetic route is as follows.

4-Fluoro-2-(l ,1-dioxo-l lambda -[l,2]thiazinan~2-yl)bemonitrile. To a mixture of2,4-difluorobenzonitrile (10.0 g, 72 mmol) and l,l-dioxo-llambda6-[l,2]thiazin-2-ane (8.84 g, 65.4 mmol) in 1:1 tetrahydrofuran/dimethylformamide (40 mL) was added potassium carbonate (9.0 g, 65.4 mmol). The mixture was stirred at 90 0C for 18 h then filtered and concentrated. The residue was purified by flash chromatography (SiO2) eluting with 10%-50% ethyl acetate/hexanes followed by recrystallization from hot ethyl acetate/hexane to give the title compound as white needles (0.537 g, 3% yield). 1H NMR (500 MHz, CD3OD) 5 ppm: 7.70 (IH, dd, J= 8.8, 5.8 Hz), 7.30 (IH, dd, J= 8.8, 2.4 Hz), 7.15-7.12 (IH, m), 3.27 (2H, t, J= 5.3 Hz), 3.33 (2H, t, J= 6.1 Hz), 2.40-2.35 (2H, m), 2.05-2.01 (2H, m). LCMS (M+H) calcd for C11H16N2OF: 255.06; found: 255.19.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 37441-50-2.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/64316; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, as follows.272437-84-0

The acid (a) in tetrahydrofuran (50 ml) and triethylamine (4.7 ml) was cooled to [0C] and [ISOBUTYLCHLOROFORMATE] (4.02 ml) was added dropwise and the solution was stirred at [0C] for 2 hours, when it was filtered into a stirred solution of sodium borohydride (3.14 g) in ice/water (50 ml). The mixture was stirred at [0C] for 1 hour and allowed to warm to room temperature. It was acidified with 2M hydrochloric acid, evaporated to half volume, and the resulting product was collected, washed with water and dried in vacuo, to give a white solid (4.5 g). MS (-ve ion electrospray) [M/Z] 194 (M-H)-

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 272437-84-0, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/2992; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, it is a common compound, a new synthetic route is introduced below.188614-01-9

188614-01-9, 3-Oxo-3, 4-dihydro-2H-benzo [1, 4] thiazine-6-carboxylic acid methyl ester (6.74 g) was suspended in tetrahydrofuran (100 ml) and 2M sodium hydroxide [(30] ml) was added followed by water (20 ml). The solution was stirred for 2.5 hours, evaporated to half volume and acidified with 2M hydrochloric acid. The product was collected, washed with water and dried in vacuo, to give a white solid (6.2 g). MS (-ve ion electrospray) [L} L/Z] 208 (M-H)-

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 188614-01-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/2992; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem