Day: October 22, 2020

154127-42-1 A common heterocyclic compound, 154127-42-1,(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Compound B (50.0 g, 140.7 mmol) was added to 450 mL of acetonitrile, trimethyl orthoacetate (27.0 g, 225.1 mmol) and triethylamine (1.4 g, 14.0 mmol) were added with stirring, and the mixture was heated to 78C. , stirring for 5h,HPLC monitoring showed complete reaction and the HPLC monitoring results are shown in Table 1 (see FIG. 1).Cool to 40C, distill off under reduced pressure, and concentrate to a minimum volume.Compound C crude product was obtained.The crude compound C was dissolved in 180 mL of tetrahydrofuran, cooled to -10 DEG C, triethylamine (31.3 g, 309.5 mmol) was slowly added dropwise at a drip rate of 1 d/s, and the addition was completed at a drip rate of 3 d/s. 4- A solution of tosyl chloride (53.5 g, 280.6 mmol) in 70 mL of tetrahydrofuran. After the addition, the temperature was controlled at -4C, and the reaction was complete after about 3 hours.At a controlled temperature of 10 C. or less, a 70% aqueous solution of ethylamine (361.0 g, 5.6 M) was slowly added dropwise at a rate of 5 d/s. After the addition, the temperature was kept stirring at 12C and the reaction was complete after about 15 hours.The mixture was concentrated under reduced pressure to 70-80 mL, and the temperature was lowered to 0C. The temperature was controlled below 30C, and concentrated hydrochloric acid (12 mol/L) was added dropwise to adjust the pH to 1 to 2, and then about 14 mL of concentrated hydrochloric acid (12 mol/L) was added. The mixture was stirred at room temperature for 1 hour. The reaction was extracted twice with methyl tert-butyl ether (2*250 mL). The organic phases were combined and extracted once with dilute hydrochloric acid (1 mol/L, 100 mL). Combine the aqueous phases, slowly add sodium bicarbonate solids, adjust the pH to 5-6, add 150 mL of water, and adjust the pH to 7-8 with 7% sodium bicarbonate solution. After adjustment, stir at room temperature for 15 h and slowly crystallize. After filtration, the filter cake was rinsed with 30 mL of water and the cake was dried to obtain 35.4 g of product with a purity of 98.3%.Add 250 mL of dichloromethane, 25 mL of methanol to the filter mother liquor, stir, extract, separate, and concentrate the organic phase to dryness4.6 g of yellow viscous material was added and 10 mL of ethyl acetate was added. Heat to 70 ~ 75 C dissolved, slowly dropped to 0 ~ 10 C, stirring 1 ~ 2h, precipitation of a white solid, continue stirring 3 ~ 4h, filtration, with 3mL water filter cake, filter cake drying,Obtained product 2.4g, purity 97.3%.Combined, the purity was 98.1%, the total yield was 65.3%, the ignition residue was 0.08%, and the chiral purity was 99.7%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 154127-42-1 reaction routes.

Reference£º
Patent; Shandong Weizhi Pharmaceutical Co., Ltd.; Shanghai Weizhi Pharmaceutical Technology Co., Ltd.; Wang Jianhua; He Yigang; Wei Yanjun; Xing Yanping; Zhao Tianchang; (27 pag.)CN107759618; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 154127-42-1,(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.154127-42-1

Prepare a 1L three-vial bottle equipped with a mechanical stirrer, a constant pressure low liquid funnel, and an ice water bath.Add compound of formula A (100 g, 0.28 mol) and acetonitrile (400 mL),Under N2 protection, stirring and cooling to 5 ~ 10 C,Then drop itTrimethyl orthoacetate(77.3g, 0.64mol),The rate of addition is such that the stability of the system does not exceed 15C.After the addition, remove the cooling and continue the reaction for 1 hour.TLC detected the disappearance of the starting material, creating a slightly more polar new point.Concentrate at normal pressure, recover the solvent and add the residue to DCM.Swirling to replace desolvation, and finally high vacuum drying for 1 hour,The residue is a compound of formula B-1Can be directly used in subsequent reactions without purificationThe reaction gave the crude product B-1 in equivalent yield., 154127-42-1

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Shanghai Bo Shirui Life Technology Co., Ltd.; Wang Dong; Wang Fangdao; Wang Meng; Cai Maojun; (16 pag.)CN107722043; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 1771-18-2,2-Methoxyphenothiazine, as follows.1771-18-2

EXAMPLE 5 Reaction of 5-methyl-2-pyrrolidinone, 2-methoxyphenothiazine and phosphorus oxychloride in 1,2-dichloroethane according to the procedure of Example 4 affords 2-METHOXY-10-[5-METHYL-1-(5-METHYL-1-PYRROLIN-2-YL)-2-PYRROLIN-2-YL]PHENOTHIAZINE HYDROCHLORIDE (8.6% yield), m.p. 236.5-238.5 C. (corr.), from ethanol-ether.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 1771-18-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Mead Johnson & Company; US3946004; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.

Step a 4-(3′-indolyl)-1-[1″-(2′”-trifluoromethyl-10′”-phenothiazinyl)-2″-methyl-3″-propionyl]-piperidine hydrochloride 27 g of 2-trifluoromethyl-phenothiazine and 12 g of alpha-methylacryloyl chloride in 100 ml of toluene were 1 for 2 hours and the mixture was evaporated to dryness. The residue was chromatographed over silica gel and elution with a 1– 1 benzene-cyclohexane mixture gave 18 g of 2-trifluoromethyl-10-(alpha-methyl acryloyl)-phenothiazine in the form of white crystals melting at 103¡ãC.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 92-30-8, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 1771-18-2,1771-18-2

Step a 4-(3′-indolyl)-1-[1″-(2′”-methoxy-10′”-phenothiazinyl) -2″-methyl-3″-propionyl]-piperidine hydrochloride A mixture of 23 g of 2methoxy-phenothiazine, 21 g of methacryloyl chloride and 120 ml of toluene was refluxed for 3 hours and was then cooled and washed with 250 ml of N sodium hydroxide. The organic phase was decanted and the aqueous phase was washed twice with 50 ml of toluene. The combined organic phases were washed with water, dried over magnesium sulfate, treated with carbon black and evaporated to dryness to obtain 29.6 g of 2-methoxy-10-(alpha-methyl acryloyl)-phenothiazine melting at 91-92 C., 1771-18-2

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 1771-18-2.

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Adding a certain compound to certain chemical reactions, such as: 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 272437-84-0,272437-84-0

Preparation of ?ralpha^5-4-r(3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carbonyl)-aminol- cvclohexanecarboxylic acid methyl ester: 3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (116 mg, 0.50 mmol, 1.0 eq) is added at room temperature to a stirred solution of tralphar¡ã-4-amino-cyclohexanecarboxylic acid methyl ester (80 mg, 0.50 mmol, 1.0 eq) in 7V,N-dimethylformamide (4 mL), followed by 1-hydroxybenzotriazole (74 mg, 0.55 mmol, 1.1 eq), 7V-(3-dimethylaminopropyl)-N’- ethylcarbodiimide hydrochloride (107 mg, 0.56 mmol, 1.15 eq) and N1N- diisopropylethylamine (192 muL, 1.12 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to afford tralphar¡ã-4-[(3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carbonyl)- amino] -cyclohexanecarboxylic acid methyl ester as an off-white solid (127 mg, 66% yield).MS m/z (+ESI): 349.2 [M+Eta]”

According to the analysis of related databases, 272437-84-0, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.92-30-8

Compound 21; 10-(4-chlorobutyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothiazine 1 (4.Og, 15 mmol), sodium hydride (1.2g, 24 mmol) in dry toluene (40 mL), 1-bromo 4- chlorobutane (3.0 g, 17.6 mmol) was added. The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice-water mixture. The crude product was extracted with ethyl acetate (3chi50mL) and the organic phase was dried over sodium sulphate. Final purification was performed by column chromatography (9: 1 hexane: ethyl acetate) on silica gel to give 21 (3.5 g, 65% ) as an oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 2-(Trifluoromethyl)-10H-phenothiazine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 38642-74-9,2-Cyano-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.38642-74-9

General procedure: In an air atmosphere, 2-phenylindole 1a (0.60 mmol), phenothiazine 2a (0.30 mmol),10mol% cuprous bromide and DMF (2mL) were added to the Schlenk reaction tube in sequence.In a constant temperature heating magnetic stirrer, the reaction was stirred at room temperature for 24 hours.After the reaction was completed, it was quenched with distilled water, extracted with ethyl acetate (3 ¡Á 20 mL), and the organic layers were combined.After drying over anhydrous sodium sulfate and spinning the organic phase, The crude product by column chromatography to give the pure product 3a (103.1 mg, 88%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-Cyano-phenothiazine.

Reference£º
Patent; Henan Normal University; Zhao Peizheng; Wang Ke; Liu Jianming; Wang Zhixian; Shao Huibin; Yue Yuanyuan; (9 pag.)CN110407830; (2019); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3080-99-7 A common heterocyclic compound, 3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a round bottom flask charged with compound 16-1 (151 mg, 1.0 mmol) and methyl 4-(bromomethyl)benzoate (228 mg, 1.0 mmol) in DMF (5 mL) was added K2CO3 (276 mg, 2.0 mmol). The resulting mixture was allowed to stir for 2 h at 80 C. The mixture was cooled to room temperature and after addition of water (15 mL) extracted with EtOAc (3 x 15 mL). The combined organic extracts were washed with brine (20 mL), dried over sodium sulfate, and concentrated under vacuum. The crude product was purified by flash chromatography (0 – 50% EtOAc/hexanes) to afford as colorless oil (110 mg, 37%).1H NMR (CDCI3) delta 8.00, 7.33 (AlphaAlpha’ChiChi’ multiplet, AX + J AX = 8.4 Hz, 4H), 7.08 (dd, / = 7.7 Hz, 1.5 Hz, 1H), 6.90 (incompletely resolved ddd approaching dt, average of two larger / = 7.8 Hz, additional / = 1.1 Hz, 1H), 6.63 (incompletely resolved ddd approaching dt, average of two larger / = 7.5 Hz, additional / = 0.8 Hz, 1H), 6.54 (dd, 7 = 8.3 Hz, 0.7 Hz, 1H), 4.57 (s, 2H), 3.90 (s, 3H), 3.69, 3.08 (AlphaAlpha’ChiChi’ multiplet, AX + J AX = 10.4 Hz, 4H). 13C NMR (CDCI3) delta 166.9, 143.8, 143.4, 130.1 (2C), 129.1, 128.0, 126.6 (2C), 126.1, 118.0, 117.8, 113.2, 56.3, 52.1, 50.6, 25.9. ESI LRMS: [M+H]+, mlz 300.2.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3080-99-7 reaction routes.

Reference£º
Patent; THE BOARD OF TRUSTEES OF THE UNIVERSITY OF ILLINOIS; KOZIKOWSKI, Alan; SHEN, Sida; BERGMAN, Joel; (100 pag.)WO2017/142883; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

1771-18-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.1771-18-2,2-Methoxyphenothiazine, it is a common compound, a new synthetic route is introduced below.

Step a 4-(3′-indolyl)-1-[1″-(2′”-methoxy-10′”-phenothiazinyl) -2″-methyl-3″-propionyl]-piperidine hydrochloride A mixture of 23 g of 2methoxy-phenothiazine, 21 g of methacryloyl chloride and 120 ml of toluene was refluxed for 3 hours and was then cooled and washed with 250 ml of N sodium hydroxide. The organic phase was decanted and the aqueous phase was washed twice with 50 ml of toluene. The combined organic phases were washed with water, dried over magnesium sulfate, treated with carbon black and evaporated to dryness to obtain 29.6 g of 2-methoxy-10-(alpha-methyl acryloyl)-phenothiazine melting at 91-92 C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1771-18-2, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem