Day: October 14, 2020

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

A solution of2- (trifluoromethyl)-lOH-phenothiazine (2.04g, 7.6mmol) and DMF (16mL) was mixed with CS2C03 (7.5g, 22.9mmol) and l-bromo-3-chloropropane (1.1 mL, 11.5mmol). The reaction mixture was heated at 65 C for 12h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi l00mL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSO iota, and concentrated to afford the title compound.

The chemical industry reduces the impact on the environment during synthesis,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, and cas is 154127-42-1, its synthesis route is as follows.

Compound (VII) (112g, 0.313 mol) was suspended in tetrahydrofuran (10 vol). Methanesulfonic anhydride (65.7g, 0.374 moles) was added in one lot and stirred. The reaction mixture was cooled to 0-50C and pyridine (2.5 vol) was added slowly over a period of 45 minutes. The reaction was monitored by TLC [Mobile phase dichloromethane: methanol, 9.5:0.5] for completion. As reaction product the intermediate compound (Vila) was obtained.To the above reaction mixture 70% aqueous ethylamine solution (400 ml, 10 vol) was added slowly at 0-5C. After the complete addition, the reaction mixture was stirred at 25-300C for 12.0 h. The reaction is monitored by TLC [Mobile phase dichloromethane: methanol, 9.5:0.5] for completion. The organic layer (ethylamine and tetrahydrofuran mixture) was distilled off completely below 500C under reduced pressure. The aqueous phase was acidified with concentrated hydrochloric acid and the pH adjusted to 3.0 at 15-25C. The aqueous phase was extracted with t-butyl methyl ether twice (2 x 2.0 vol) to remove any organic impurities if present. The t-butyl methyl ether layer was extracted with 1 N HCI solution and the layers separated.The aqueous layers were combined, treated with activated charcoal and heated at 65-700C. The contents were stirred at 65-700C for 30 minutes, filtered through hyflo supercel at 65-700C and washed with preheated water(65-700C). The filtrate was cooled to 25-30C and the pH was adjusted to 8 with solid sodium bicarbonate. The reaction mixture was stirred for 12 h for crystallization. If the crystallization did not occur, the reaction mass was filtered through a Bchner funnel, extracted with ethyl acetate (3 x 5.0 vol), dried over sodium sulphate and filtered. The organic layer was distilled completely (below 500C) under reduced pressure. The crude product was obtained as a pale yellow syrup, which was washed with hexane (4 x 1.0 vol) to yield a residue which crystallized to a solid on standing.Yield of crude compound (VIIl): 8Og (66.3%)

154127-42-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,154127-42-1 ,(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; AZAD PHARMACEUTICAL INGREDIENTS AG; RAMAKRISHNAN, Arul; SONI, Anil Kumar; ADHIKARI, Sujit Das; RAO, Kommula Srinivasa; PAUL, Soumendu; SRINIVASULU, Ganta; WO2010/103115; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 2-(Trifluoromethyl)-10H-phenothiazine, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 92-30-8, its synthesis route is as follows.

General procedure: Phenothiazine 1 (5g, 25.09mmol) was taken in anhydrous N, N-dimethyl formamide (DMF) (50mL) in a dry round bottom flask. Sodium hydride (2g, 50.18mmol) was added under nitrogen condition at 0C and stirred for 30min at room temperature. Methyl iodide (3.4mL, 50.18mmol) was added and continued the stirring for 8h. After that, the reaction mixture (monitored by TLC) was quenched with ice cold water (150mL). The separated solid was filtered off, dried and used as such for the next step.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Reddyrajula, Rajkumar; Dalimba, Udayakumar; Madan Kumar; European Journal of Medicinal Chemistry; vol. 168; (2019); p. 263 – 282;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 2-(Trifluoromethyl)-10H-phenothiazine, and cas is 92-30-8, its synthesis route is as follows.

Compound 21; 10-(4-chlorobutyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothiazine 1 (4.Og, 15 mmol), sodium hydride (1.2g, 24 mmol) in dry toluene (40 mL), 1-bromo 4- chlorobutane (3.0 g, 17.6 mmol) was added. The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice-water mixture. The crude product was extracted with ethyl acetate (3chi50mL) and the organic phase was dried over sodium sulphate. Final purification was performed by column chromatography (9: 1 hexane: ethyl acetate) on silica gel to give 21 (3.5 g, 65% ) as an oil.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 3-Bromo-10H-phenothiazine, and cas is 3939-23-9, its synthesis route is as follows.

Compound 1 was synthesized by the modification of the published method [18]. Sodium hydride(2.2 g, 53.9 mmol) was stirred with 3-bromo-10H-phenothiazine (10.0 g, 35.9 mmol, dissolved in dryDMF) for 30 min. Bromoethane (4.7 g, 43.1 mmol) was then added to the mixture and stirred for 10 hat room temperature in dark environment. After the reaction completed, water was added to react theremaining sodium hydride. White solid was precipitated and collected by vacuum filtration. The solidwas first washed with small amount of EA and then washed with n-hexane. 1H NMR (400 MHz,acetone-d6) 7.34 (dd, J = 8.7, 2.3 Hz, 1H), 7.28 (d, J = 2.3 Hz, 1H), 7.25-7.19 (m, 1H), 7.15 (dd, J = 7.6,1.5 Hz, 1H), 7.04 (dd, J = 8.3, 1.2 Hz, 1H), 6.99 (d, J = 1.2 Hz, 0H), 6.97 (s, 1H), 6.95 (s, 1H), 3.99 (q,J = 6.9 Hz, 2H), 1.38 (t, J = 6.9 Hz, 3H).

3939-23-9, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,3939-23-9 ,3-Bromo-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Lao, Hio Kuan; Tan, Jingyun; Wang, Chunfei; Zhang, Xuanjun; Molecules; vol. 24; 19; (2019);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3939-23-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Bromo-10H-phenothiazine, cas is 3939-23-9,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

In a nitrogen-flushed 250 mL round-bottom flask with a magnetic stir bar and septum 3-bromo-10H-phenothiazine (4.95 g, 17.8 mmol) was dissolved in dry THF (50 mL) under nitrogen. The colorless solution was deaerated by a constant stream of nitrogen through a syringe for 10 min and cooled to 0 C (ice bath/water). Potassium tert-butanolate (2.40 g, 21.4 mmol) was added to the reaction mixture under nitrogen and the reaction mixture was allowed to come to room temperature and then stirred for 1 h. To this solution 1-bromo hexane (3.00 mL, 21.4 mmol) was slowly added by syringe and stirring at room temp was continued for 16 h. The solvents were removed in vacuo and the residue was adsorbed onto celiteand purified by chromatography on silica gel (n-hexane) to give 5.83 g (90%) of 3-bromo-10-hexyl-10H-phenothiazine (1a) as a yellow resin, Rf (n-hexane) = 0.43. The NMR spectra were in excellent agreement with the literature. 1H NMR (300 MHz, acetone-d6): delta = 0.84 (t, 3J = 7.1 Hz, 3 H), 1.23-1.33 (m, 4 H), 1.44 (dt, 3J = 7.2 Hz, 3J = 6.8 Hz, 2 H), 1.77 (dt, 3J = 7.5 Hz, 3J = 7.5 Hz, 2 H), 3.92 (t, 3J = 7.0 Hz, 2 H), 6.95 (d, 3J = 8.7 Hz, 2 H), 7.03 (dd, 3J = 8.2 Hz, 4J = 0.9 Hz, 1 H), 7.14 (dd, 3J = 7.6 Hz, 4J = 1.4 Hz, 1 H), 7.21 (ddd, 3J = 8.2 Hz, 3J = 7.3 Hz, 4J = 1.6 Hz, 1 H), 7.27 (d, 4J = 2.2 Hz, 1 H), 7.32 (dd, 3J = 8.6 Hz, 4J = 2.3 Hz, 1 H). -13C NMR (75 MHz, acetone-d6): delta = 14.2 (CH3), 23.2 (CH2), 27.0 (CH2), 27.4 (CH2), 32.1 (CH2), 47.9 (CH2), 114.7 (Cquat), 116.9 (CH), 118.1 (CH), 123.6 (CH), 124.7 (Cquat), 128.1 (Cquat), 128.1 (CH), 128.6 (CH), 130.0 (CH), 130.9 (CH), 145.7 (Cquat), 145.9 (Cquat).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Bromo-10H-phenothiazine, 3939-23-9

Reference£º
Article; Urselmann, Dominik; Deilhof, Konstantin; Mayer, Bernhard; Mueller, Thomas J. J.; Beilstein Journal of Organic Chemistry; vol. 12; (2016); p. 2055 – 2064;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3080-99-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dihydro-2H-benzo[b][1,4]thiazine, cas is 3080-99-7,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

To a round bottom flask charged with compound 16-1 (151 mg, 1.0 mmol) and methyl 4-(bromomethyl)benzoate (228 mg, 1.0 mmol) in DMF (5 mL) was added K2CO3 (276 mg, 2.0 mmol). The resulting mixture was allowed to stir for 2 h at 80 C. The mixture was cooled to room temperature and after addition of water (15 mL) extracted with EtOAc (3 x 15 mL). The combined organic extracts were washed with brine (20 mL), dried over sodium sulfate, and concentrated under vacuum. The crude product was purified by flash chromatography (0 – 50% EtOAc/hexanes) to afford as colorless oil (110 mg, 37%).1H NMR (CDCI3) delta 8.00, 7.33 (AlphaAlpha’ChiChi’ multiplet, AX + J AX = 8.4 Hz, 4H), 7.08 (dd, / = 7.7 Hz, 1.5 Hz, 1H), 6.90 (incompletely resolved ddd approaching dt, average of two larger / = 7.8 Hz, additional / = 1.1 Hz, 1H), 6.63 (incompletely resolved ddd approaching dt, average of two larger / = 7.5 Hz, additional / = 0.8 Hz, 1H), 6.54 (dd, 7 = 8.3 Hz, 0.7 Hz, 1H), 4.57 (s, 2H), 3.90 (s, 3H), 3.69, 3.08 (AlphaAlpha’ChiChi’ multiplet, AX + J AX = 10.4 Hz, 4H). 13C NMR (CDCI3) delta 166.9, 143.8, 143.4, 130.1 (2C), 129.1, 128.0, 126.6 (2C), 126.1, 118.0, 117.8, 113.2, 56.3, 52.1, 50.6, 25.9. ESI LRMS: [M+H]+, mlz 300.2.

The chemical industry reduces the impact on the environment during synthesis,3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; THE BOARD OF TRUSTEES OF THE UNIVERSITY OF ILLINOIS; KOZIKOWSKI, Alan; SHEN, Sida; BERGMAN, Joel; (100 pag.)WO2017/142883; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

37441-50-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,2-Thiazinane 1,1-dioxide, cas is 37441-50-2,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

6- (1, 1-Dioxo- [1, 2]-thiazinan-2-yl)-3-hydroxy-4-methoxy- pyridine-2-carboxylic acid 4-fluoro-benzylamide compound 62 To a solution of 3-benzyloxy-6-bromo-4-methoxy-pyridine-2- carboxylic acid 4-fluoro-benzylamide (44.5 mg, 0.1 mmol) in toluene (4 ml) were added 1, 4-butanesultam (16.2 mg, 0.12 mmol), cesium carbonate (65 mg, 0.2 mmol), CuI (1.9 mg, 0.01 mmol), 1, 10-phenanthroline (3.6 mg, 0.02 mmol). Under nitrogen, the mixture was stirred at 100’C overnight. After removal of the solvent under reduced pressure, the residue was dissolved into water (10 mL) and extracted with dichloromethane (3 x 10 mL), and the combined organic layers were dried over anhydrous sodium sulfate. Evaporation of the solvent under reduced pressure provided a residue, which was purified on silica gel column eluting with hexane and ethyl acetate (5: 5) to afford a white solid (45 mg). This product (40 mg) was deprotected using hydrogenolysis in methanol to provide the title compound (30 mg).. 1H NMR (400 MHz, CDC13) : 6 [ppm] 12.22 (s, 1H), 7.90 (br s, 1H), 7.30 (m, 2H), 7.07 (m, 3H), 4.58 (d, 2H), 3.92 (m, 5H), 3.13 (m, 2H), 2.30 (m, 2H), 1.89 (m, 2H). LC/MS : m/z 410.2 (M + H+).

The chemical industry reduces the impact on the environment during synthesis,37441-50-2,1,2-Thiazinane 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; VIROCHEM PHARMA INC.; WO2005/42524; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 272437-84-0, its synthesis route is as follows.

Preparation of 4-[(3-oxo-3,4-dihydro-2H-benzo[l ,41thiazine-6-carbonyl)-aminol-piperidine- 1-carboxylic acid tert-butyl ester:3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (556 mg, 2.45 mmol, 1.0 eq) is added at room temperature to a stirred solution of 4-amino-piperidine- 1-carboxylic acid tert- butyl ester (500 mg, 2.45 mmol, 1.0 eq) in N,N-dimethylformamide (20 mL), followed by 1- hydroxybenzotriazole (421 mg, 2.69 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’- ethylcarbodiimide hydrochloride (550 mg, 2.81 mmol, 1.15 eq) and N,N- diisopropylethylamine (962 L, 5.50 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 30 – – mL) and water (30 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by column chromatography (silica gel, eluent: cyclohexane:ethyl acetate :methanol, 1 :3:0 to 0/9/1, v/v/v) to afford 4-[(3-oxo-3,4- dihydro-2H-benzo [ 1 ,4]thiazine-6-carbonyl)-amino ] -piperidine- 1 -carboxylic acid tert-butyl ester as a light yellow solid (621 mg, 62% yield).1H-NMR (400 MHz, DMSO- 6) delta ppm: 10.66 (s, 1H), 8.27 (d, J = 7.8 Hz, 1H), 7.42 (m, 3H), 3.96 (m, 3H), 3.51 (s, 2H), 2.90 (m, 2H), 1.76 (m, 2H), 1.40 (m, 11H).MS m/z (+ESI): 392.3 [M+H]+, 414.3 [M+Na]+.

272437-84-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,272437-84-0 ,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; XIE, Tong; XU, Lin; WO2012/171860; (2012); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 272437-84-0, its synthesis route is as follows.

Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(7- methoxy-quinoxalin-2-ylsulfanyl)-ethvH-piperidin-4-vU -methyl-amide: 3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (26 mg, 0.11 mmol, 1.0 eq) is added at room temperature to a stirred solution of {l-[2-(7-methoxy-quinoxalin-2- ylsulfanyl)-ethyl]-piperidin-4-yl}-methyl-amine (40 mg, 0.11 mmol, 1.0 eq) in N,N- dimethylformamide (3 mL), followed by O-(7-azabenzotriazol-l-yl)-iV,iV,N’,N’- tetramethyluronium hexafluorophosphate (45 mg, 0.11 mmol, 1.0 eq), and triethylamine (16 muL, 0.11 mmol, 1.0 eq). After 4 hours stirring at room temperature, solvent is evaporated and the residue is purified by preparative EtaPLC to afford 3-oxo-3,4-dihydro-2H- benzo[l,4]thiazine-6-carboxylic acid {l-[2-(7-methoxy-quinoxalin-2-ylsulfanyl)-ethyl]- piperidin-4-yl} -methyl-amide as a yellow solid (22 mg, 35% yield).MS m/z (+ESI): 524.3 [M+Eta]”

272437-84-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,272437-84-0 ,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem