Month: October 2020

A common heterocyclic compound, 154127-42-1,(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 154127-42-1

To a solution of IX (41 g, 0.12 moles) and triethylamine (33 ml. 0.24 moles) in anhydrous tetrahydrofuran (615 ml) cooled to 0 to 5 C. was added a solution of tosyl chloride (44 g, 0.24 moles) in tetrahydrofuran (205 ml). The mixture was allowed to warm to room temperature and stirred for 18 hours. The reaction mixture was cooled to 0 to 5 C. and ethylamine gas was purged from its 70% aqueous solution (365 ml) below 10 C. Reaction mixture was allowed to attain ambient temperature and stirred for 36 hours. The reaction mixture was concentrated and ethyl acetate (615 ml) was added to it. Further the organic layer was washed with water (410 ml). The concentrated ethyl acetate layer and MDC (615 ml) was added followed by cooling to temperature 0 to 5 C. and 6M hydrochloric acid (600 ml) was added. The reaction mixture was stirred for 1 h at 15 to 20 C. Aqueous layer was washed with MDC (205 ml). pH of the aqueous solution was adjusted to 8 using sodium bicarbonate solution causing white solid to precipitate which was extracted with ethyl acetate (2*410 ml). The ethyl acetate layer was evaporated to dryness to yield crude Brinzolamide (29 g, 66%). Material was recrystallized from ethanol. [Purity: greater than 99.5%, m.p. 125-127 C.], 154127-42-1

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,154127-42-1,(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide,its application will become more common.

Reference£º
Patent; Sathe, Dhananjay Govind; Tarur, Radhakrishnan Venkatasubramanian; Bhise, Nandu Baban; Shinde, Ajit Bhaskar; Pardeshi, Santosh; US2010/9977; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3,4-Dihydro-2H-benzo[b][1,4]thiazine,3080-99-7, This compound has unique chemical properties. The synthetic route is as follows.,3080-99-7

In a manner similar to the method described in Example 1-1, using 3,4-dihydro-2H-benzo[1,4]thiazine in place of 1,2,3,4-tetrahydroquinoline, 239 mg (yield: 63%) of the captioned compound was obtained.1H-NMR (ppm) (300 MHz, CDCl3) 6.98 (1H, dd, J = 1.8, 7.9 Hz), 6.86 (1H, ddd, J = 1.8, 7.3, 8.5 Hz), 6.78 (1H, d, J = 8.2 Hz), 6.69-6.65 (2H, m), 6.61-6.5 (1H, ddd, J = 1.2, 7.6, 8.5 Hz), 4.61 (1H, d, J = 8.2 Hz), 3.85 (3H, s), 3.60-3.51 (3H, m), 3.14-2.96 (4H, m), 2.55-2.50 (1H, m), 2.41 (3H, s), 2.38-2.32 (1H, m), 2.23-2.12 (2H, m), 1.91-1.47 (5H, m), 1.12-1.00 (1H, m) IR (cm-1) (KBr) 2924, 1735, 1606, 1584, 1483, 1438, 1373, 1338, 1275, 1257, 1176, 1148, 1112, 1079, 1047, 1006, 937, 907, 891, 854, 793, 744

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 3080-99-7.

Reference£º
Patent; TORAY INDUSTRIES, INC.; EP1555266; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, as follows.92-30-8

General procedure: Phenothiazine 1 (5g, 25.09mmol) was taken in anhydrous N, N-dimethyl formamide (DMF) (50mL) in a dry round bottom flask. Sodium hydride (2g, 50.18mmol) was added under nitrogen condition at 0C and stirred for 30min at room temperature. Methyl iodide (3.4mL, 50.18mmol) was added and continued the stirring for 8h. After that, the reaction mixture (monitored by TLC) was quenched with ice cold water (150mL). The separated solid was filtered off, dried and used as such for the next step.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 92-30-8, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Reddyrajula, Rajkumar; Dalimba, Udayakumar; Madan Kumar; European Journal of Medicinal Chemistry; vol. 168; (2019); p. 263 – 282;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-(Trifluoromethyl)-10H-phenothiazine,92-30-8, This compound has unique chemical properties. The synthetic route is as follows.

92-30-8, A mixture of 1-1 [2-(trifluoromethyl)-l0i7-phenothiazine] (300 mg, 1.12 mmol), 1- bromo-4-chlorobutane (391 mg, 2.28 mmol) and CS2CO3 (1.04 g, 3.19 mmol) in DMF (15 mL) was stirred at rt overnight. The mixture was poured into cool water (20 mL) and extracted with EtOAc (15 mL x 3). The combined organic extracts were washed with brine, dried over NaiSCE. fdtered and concentrated under reduced pressure. The residue was purified by column chromatography (petrol ether: EtOAc =10: 1) to provide a yellow solid (240 mg, 60% yield). LC-MS: Rt = 2.30 min; ESI, m/r 358 [M + 1] +

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 92-30-8.

Reference£º
Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

Preparation of (3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid {trans-4-2-(6- methoxy-ri,51naphthyridin-3-yloxy)-ethyll-cvclohexyU)-amide: 3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (59 mg, 0.25 mmol, 1.0 eq) is added at room temperature to a stirred solution of tralphar¡ã-4-[2-(6-methoxy- [l,5]naphthyridin-3-yloxy)-ethyl]-cyclohexylamine (80 mg, 0.25 mmol, 1.0 eq) inN,N- dimethylformamide (5 mL), followed by 1-hydroxybenzotriazole (37 mg, 0.28 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (56 mg, 0.29 mmol, 1.15 eq) and 7V,N-diisopropylethylamine (97 muL, 0.57 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by preparative EtaPLC to afford (3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid {trans-4-[2-(6- methoxy-[l,5]naphthyridin-3-yloxy)-ethyl]-cyclohexyl})-amide as a white lyophilizated powder (36 mg, 27% yield). 1H-NMR (400 MHz, DMSO-t/6) delta ppm: 10.64 (s, IH), 8.53 (d, J = 2.8 Hz, IH), 8.19 (dd, J = 0.7, 9.0 Hz, 2H), 7.62 (dd, J = 0.5, 2.5 Hz, IH), 7.37-7.46 (m, 3H), 7.07 (d, J = 9.0 Hz, IH), 4.24 (t, J = 6.6 Hz, 2H), 4.00 (s, 3H), 3.70-3.80 (m, IH), 3.50 (s, 2H), 1.80-1.90 (m, 4H), 1.70-1.80 (m, 2H), 1.45-1.55 (m, IH), 1.30-1.40 (m, 2H), 1.05-1.18 (m, 2H). MS m/z (+ESI): 493.4 [M+H]+., 272437-84-0

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

1 -Bromo-3-chloropropane (37.68 g, 200 mmol) was added to 2-(trifluoromethyl)- l0i7-phenothiazine (26.7 g, 100 mmol) and Cs2CC>3 (65.6 g, 200 mmol) in DMF (130 mL). The mixture was stirred at 30 C for 48 h and then heated to 80 C for 2 h. The mixture was cooled to rt then H20 was added. The mixture was extracted with PE three times (200 mL x 3). The combined organic phase was washed with brine, dried over Na2S04, and concentrated in vacuo. The residue was purified by column chromatography (PE 100%, PE:EtOAc = 60: 1) to get 10.8 g pure and 19 g crude. LC-MS: Rt = 2.29 min; ESI, m/z 344 [M+l]+.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 37441-50-2,1,2-Thiazinane 1,1-dioxide, as follows.37441-50-2

Part E 7-Bromo-2-ethoxymethyl-1-(3-isopropoxypropyl)-1FI imidazo[4,5-c]quinolin-4- amine (0.75 g), 1,4-butanesultam (0.29 g), copper (I) (68 mg), (No.)-trans-1,2- diaminocyclohexane (42 muL), potassium phosphate (0.79 g) and dioxane (4 mL) were added to a scintillation vial. The vial was flushed with nitrogen, sealed with a Teflon- lined cap, placed in an oil bath, and heated at 110 C for 30 hours. The reaction was cooled to ambient temperature, diluted with chloroform and filtered through a bed of CELITE filter agent. The solvent was evaporated and the residue was purified by column chromatography on a Biotage HorizonNo. High-Performance Flash Chromatography instrument using a silica gel cartridge. The polar component of the eluent was chloroform:methanol:ammonium hydroxide 80:18:2 (CMA). The purification was carried out eluting with chloroform: CMA in a gradient from 99: 1 to 90: 10. Additional purification by recrystallization from acetonitrile provided 0.47 g of 7-(1,1-dioxo- [1,2]thiazinan-2-yl)-2-ethoxymethyl-1-(3-isopropoxypropyl)-1H imidazo[4,5-c]quinolin- 4-amine as pale yellow crystals, mp 172-174 C.

According to the analysis of related databases, 1,2-Thiazinane 1,1-dioxide, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; 3M INNOVATIVE PROPERTIES COMPANY; WO2005/123080; (2005); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

37441-50-2 A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

6- (1, 1-Dioxo- [1, 2]-thiazinan-2-yl)-3-hydroxy-4-methoxy- pyridine-2-carboxylic acid 4-fluoro-benzylamide compound 62 To a solution of 3-benzyloxy-6-bromo-4-methoxy-pyridine-2- carboxylic acid 4-fluoro-benzylamide (44.5 mg, 0.1 mmol) in toluene (4 ml) were added 1, 4-butanesultam (16.2 mg, 0.12 mmol), cesium carbonate (65 mg, 0.2 mmol), CuI (1.9 mg, 0.01 mmol), 1, 10-phenanthroline (3.6 mg, 0.02 mmol). Under nitrogen, the mixture was stirred at 100’C overnight. After removal of the solvent under reduced pressure, the residue was dissolved into water (10 mL) and extracted with dichloromethane (3 x 10 mL), and the combined organic layers were dried over anhydrous sodium sulfate. Evaporation of the solvent under reduced pressure provided a residue, which was purified on silica gel column eluting with hexane and ethyl acetate (5: 5) to afford a white solid (45 mg). This product (40 mg) was deprotected using hydrogenolysis in methanol to provide the title compound (30 mg).. 1H NMR (400 MHz, CDC13) : 6 [ppm] 12.22 (s, 1H), 7.90 (br s, 1H), 7.30 (m, 2H), 7.07 (m, 3H), 4.58 (d, 2H), 3.92 (m, 5H), 3.13 (m, 2H), 2.30 (m, 2H), 1.89 (m, 2H). LC/MS : m/z 410.2 (M + H+).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 1,2-Thiazinane 1,1-dioxide reaction routes.

Reference£º
Patent; VIROCHEM PHARMA INC.; WO2005/42524; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.92-30-8

General procedure: To a stirred solution of phenothiazine or 2-(trifluoromethyl)-10H-phenothiazine (3 mmol) in dichloromethane (20 mL), K2CO3 (5 mmol) and propargyl bromide (5 mmol) were added carefully and the reaction mixture was refluxed for 7 h. After the reaction, the system was concentrated under vacuum, the residue was dissolved in EtOAc (40 mL) and washed by pure water and brine, and dried over anhydrous Na2SO4 and concentrated under vacuum to afford crude products 8a-8b, which were used in the next reaction without further purification.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Article; Zhang, Jun-Xia; Guo, Jiao-Mei; Zhang, Ting-Ting; Lin, Hong-Jun; Qi, Nai-Song; Li, Zhen-Guo; Zhou, Ji-Chun; Zhang, Zhen-Zhong; Molecules; vol. 23; 6; (2018);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-Cyano-phenothiazine,38642-74-9, This compound has unique chemical properties. The synthetic route is as follows.,38642-74-9

General procedure: In an air atmosphere, 2-phenylindole 1a (0.60 mmol), phenothiazine 2a (0.30 mmol),10mol% cuprous bromide and DMF (2mL) were added to the Schlenk reaction tube in sequence.In a constant temperature heating magnetic stirrer, the reaction was stirred at room temperature for 24 hours.After the reaction was completed, it was quenched with distilled water, extracted with ethyl acetate (3 ¡Á 20 mL), and the organic layers were combined.After drying over anhydrous sodium sulfate and spinning the organic phase, The crude product by column chromatography to give the pure product 3a (103.1 mg, 88%)., 38642-74-9

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 38642-74-9.

Reference£º
Patent; Henan Normal University; Zhao Peizheng; Wang Ke; Liu Jianming; Wang Zhixian; Shao Huibin; Yue Yuanyuan; (9 pag.)CN110407830; (2019); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem