Month: September 2020

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64%) and ortho-3a (34 mg, 21%) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3080-99-7 A common heterocyclic compound, 3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

In a manner similar to the method described in Example 1-1, using 3,4-dihydro-2H-benzo[1,4]thiazine in place of 1,2,3,4-tetrahydroquinoline, 239 mg (yield: 63%) of the captioned compound was obtained.1H-NMR (ppm) (300 MHz, CDCl3) 6.98 (1H, dd, J = 1.8, 7.9 Hz), 6.86 (1H, ddd, J = 1.8, 7.3, 8.5 Hz), 6.78 (1H, d, J = 8.2 Hz), 6.69-6.65 (2H, m), 6.61-6.5 (1H, ddd, J = 1.2, 7.6, 8.5 Hz), 4.61 (1H, d, J = 8.2 Hz), 3.85 (3H, s), 3.60-3.51 (3H, m), 3.14-2.96 (4H, m), 2.55-2.50 (1H, m), 2.41 (3H, s), 2.38-2.32 (1H, m), 2.23-2.12 (2H, m), 1.91-1.47 (5H, m), 1.12-1.00 (1H, m) IR (cm-1) (KBr) 2924, 1735, 1606, 1584, 1483, 1438, 1373, 1338, 1275, 1257, 1176, 1148, 1112, 1079, 1047, 1006, 937, 907, 891, 854, 793, 744

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine,its application will become more common.

Reference£º
Patent; TORAY INDUSTRIES, INC.; EP1555266; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

Compound 21; 10-(4-chlorobutyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothiazine 1 (4.Og, 15 mmol), sodium hydride (1.2g, 24 mmol) in dry toluene (40 mL), 1-bromo 4- chlorobutane (3.0 g, 17.6 mmol) was added. The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice-water mixture. The crude product was extracted with ethyl acetate (3chi50mL) and the organic phase was dried over sodium sulphate. Final purification was performed by column chromatography (9: 1 hexane: ethyl acetate) on silica gel to give 21 (3.5 g, 65% ) as an oil., 92-30-8

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

1 -Bromo-3-chloropropane (37.68 g, 200 mmol) was added to 2-(trifluoromethyl)- l0i7-phenothiazine (26.7 g, 100 mmol) and Cs2CC>3 (65.6 g, 200 mmol) in DMF (130 mL). The mixture was stirred at 30 C for 48 h and then heated to 80 C for 2 h. The mixture was cooled to rt then H20 was added. The mixture was extracted with PE three times (200 mL x 3). The combined organic phase was washed with brine, dried over Na2S04, and concentrated in vacuo. The residue was purified by column chromatography (PE 100%, PE:EtOAc = 60: 1) to get 10.8 g pure and 19 g crude. LC-MS: Rt = 2.29 min; ESI, m/z 344 [M+l]+.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 188614-01-9

At 40 in to methyl-3-oxo-3,4-dihydro -2H-1,4- benzothiazine-6-carboxylate (475mg, 2.00mmol), borohydride the mixture of sodium (151mg, 3.99mmol) in tetrahydrofuran (2.0mL) dropwise addition of methanol (640mg). After stirring for 1 hour at 40 , under ice-cooling, use 1mol / L diluted hydrochloric acid, and extracted with ethyl acetate. The combined organic layers were dried over sodium sulfate, filtered, concentrated, and the use of silica gel column chromatography (hexane: ethyl acetate = 1: 1) and the residue was purified to obtain the title compound (130mg, 31%) .

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate,its application will become more common.

Reference£º
Patent; SUMITOMO DAINIPPON PHARMA CO., LTD.; YOSHINAGA, HIDEFUMI; URUNO, YOSHIHARU; SAWAMURA, KIYOTO; GOTO, NANA; IKUMA, YOHEI; (165 pag.)TW2016/5858; (2016); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

A stirred mixture of methyl 6-BROMO-3-HYDROXYPYRIDINE-2-CARBOXYLATE (6.15 g, 26.5 mmol), 8-sultam (described in WO 02/30931-A2, Merck & Co. , Inc. , 2002) (3. 98 g, 29.4 mmol) and copper (I) oxide (5.75 g, 40.2 mmol) in anhydrous pyridine (100 mL) was heated at 130 C, under argon, for 6 h. The mixture was cooled, and the pyridine removed under reduced pressure. The residue was treated with CH2C12 (400 mL) and EDTA (0.35 M in H20, 300 ML, 105 mmol) and air was bubbled into the mixture for 18 h. The mixture was filtered through a pad of celite and the aqueous layer was saturated with solid NACI and extracted with CH2CLZ (4 x 250 mL). The combined organic extracts were dried (NA2S04), filtered, and concentrated in vacuo to afford a crude oil. The oil was dissolved in MEOH (400 mL) and conc. H2S04 (2 ML) and heated to reflux for 18 h, then allowed to cool to ambient temperature. Most of the solvent was removed in vacuo and the residual mixture was partitioned between CHZCLX (400 mL) and saturated NAHCO3 (400 mL). The aqueous layer was extracted further with CH2Cl2 (2 x 250 mL) and the combined organic extracts were dried (NA2S04), filtered, and concentrated in vacuo to afford a crude sample of the product. This crude product was partially purified by silica gel chromatography, eluting with a gradient of CH2C12 : MEOH-100 : 0 to 95: 5 to give a yellow solid that was crystallized from MEOH to afford the title compound as a pale yellow solid of sufficient purity for use in the next step. MS: FALZ = 287 (M + 1).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,2-Thiazinane 1,1-dioxide,37441-50-2,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2005/9962; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

272437-84-0, Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(7- methoxy-quinoxalin-2-ylsulfanyl)-ethvH-piperidin-4-vU -methyl-amide: 3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (26 mg, 0.11 mmol, 1.0 eq) is added at room temperature to a stirred solution of {l-[2-(7-methoxy-quinoxalin-2- ylsulfanyl)-ethyl]-piperidin-4-yl}-methyl-amine (40 mg, 0.11 mmol, 1.0 eq) in N,N- dimethylformamide (3 mL), followed by O-(7-azabenzotriazol-l-yl)-iV,iV,N’,N’- tetramethyluronium hexafluorophosphate (45 mg, 0.11 mmol, 1.0 eq), and triethylamine (16 muL, 0.11 mmol, 1.0 eq). After 4 hours stirring at room temperature, solvent is evaporated and the residue is purified by preparative EtaPLC to afford 3-oxo-3,4-dihydro-2H- benzo[l,4]thiazine-6-carboxylic acid {l-[2-(7-methoxy-quinoxalin-2-ylsulfanyl)-ethyl]- piperidin-4-yl} -methyl-amide as a yellow solid (22 mg, 35% yield).MS m/z (+ESI): 524.3 [M+Eta]”

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, General procedure: To a stirred solution of phenothiazine or 2-(trifluoromethyl)-10H-phenothiazine (3 mmol) in dichloromethane (20 mL), K2CO3 (5 mmol) and propargyl bromide (5 mmol) were added carefully and the reaction mixture was refluxed for 7 h. After the reaction, the system was concentrated under vacuum, the residue was dissolved in EtOAc (40 mL) and washed by pure water and brine, and dried over anhydrous Na2SO4 and concentrated under vacuum to afford crude products 8a-8b, which were used in the next reaction without further purification.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Article; Zhang, Jun-Xia; Guo, Jiao-Mei; Zhang, Ting-Ting; Lin, Hong-Jun; Qi, Nai-Song; Li, Zhen-Guo; Zhou, Ji-Chun; Zhang, Zhen-Zhong; Molecules; vol. 23; 6; (2018);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, Compound 27; 10-[2-(N-Boc-4-piperidyl)ethyl]-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothizine 1 (0.9 Ig, 3.42 mmol), sodium hydride (0.2g, 4.0 mmol) in DME (20 mL) at 90¡ãC was added N-Boc- 4-(2-bromoethyl)piperidine 26 (1.Og, 3.42 mmol) dropwise under an atmosphere of argon. The reaction mixture was stirred for 12h at reflux temperature. The reaction mixture was filtered, and filtrate was concentrated under vacuum. The residue was partitioned between ethyl acetate (25 mL) and brine (1OmL). The organic layer was dried over anhydrous sodium sulphate, filtered, and evaporated. The resulting residue was purified by column chromatography (8:2 n-hexane : ethyl acetate) on silica gel to give phenothiazine derivative 27 (0.3 g, 18percent) as a foam. MS(ESI): m/z 479(M+H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

188614-01-9 A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A. 3-Oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid. To a solution of 3-oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (1.5 g, 6,7 mmol) in a THF/H2O mixture (1:1, 63 mL) was added 4 N LiOH (8.0 mL, 32 mmol) and the resulting solution was stirred at RT for 24 h. The solution was partially concentrated and diluted with H2O (50 mL). The solution was acidified using concentrated HCl and a solid precipitated. The solid was collected via filtration, washed with H2O and dried in vacuo to provide 0.79 g (60%) of the title compound as a white solid. MS (ESI): exact mass calculated for C9H7NO3S, 209.01; m/z found, 210.2 [M+H]+. 1H NMR (500 MHz, CD3OD): 7.65-7.61 (m, 2H), 7.40 (d, J=8.1, 1H), 3.48 (s, 2H)., 188614-01-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate,its application will become more common.

Reference£º
Patent; Allison, Brett D.; Gomez, Laurent; Grice, Cheryl A.; Hack, Michael D.; Morrow, Brian J.; Motley, S. Timothy; Santillan, Alejandro; Shaw, Karen J.; Schwarz, Kimberly L.; Tang, Liu Y.; Venkatesan, Hariharan; Wiener, John J. M.; US2006/223810; (2006); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem