Some tips on 272437-84-0

With the complex challenges of chemical substances, we look forward to future research findings about 272437-84-0,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, and cas is 272437-84-0, its synthesis route is as follows.,272437-84-0

Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(7- methoxy-quinoxalin-2-yloxy)-ethvH-piperidin-4-vU -amide: 3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (60 mg, 0.26 mmol, 1.0 eq) is added at room temperature to a stirred solution of l-[2-(7-methoxy-quinoxalin-2-yloxy)- ethyl]-piperidin-4-ylamine (80 mg, 0.26 mmol, 1.0 eq) in N,N-dimethylformamide (5 mL), followed by 1-hydroxybenzotriazole (38 mg, 0.29 mmol, 1.1 eq), N-Q- dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (57 mg, 0.30 mmol, 1.15 eq) and N,N-diisopropylethylamine (100 muL, 0.58 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a residue that is purified by preparative EtaPLC to afford 3-oxo-3,4- dihydro-2H-benzo[ 1 ,4]thiazine-6-carboxylic acid { 1 -[2-(7-methoxy-quinoxalin-2-yloxy)- ethyl]-piperidin-4-yl} -amide as an off-white solid (18 mg, 13% yield).1H-NMR (400 MHz, DMSO-t/6) delta ppm: 10.65 (s, IH), 8.42 (s,lH), 8.22 (d, J = 7.8 Hz, IH), 7.89 (d, J = 9.0 Hz, IH), 7.38-7.46 (m, 3H), 7.22-7.28 (m, 2H), 4.56 (t, J = 5.8 Hz, 2H), 3.92 (s, 3H), 3.75 (m, IH), 3.50 (s, 2H), 3.00 (m, 2H), 2.81 (t, J = 5.8 Hz, 2H), 2.18 (m, 2H), 1.79 (m, 2H), 1.55 (m, 2H).MS m/z (+ESI): 494.4 [M+H]+.

With the complex challenges of chemical substances, we look forward to future research findings about 272437-84-0,belong thiazines compound

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on 3939-23-9

With the complex challenges of chemical substances, we look forward to future research findings about 3939-23-9,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is 3-Bromo-10H-phenothiazine, and cas is 3939-23-9, its synthesis route is as follows.,3939-23-9

2, under nitrogen protection will be prepared in step 1 p-phenylenediamine and phenothiazine derivatives according to 1:1 molar ratio was added to toluene, while adding potassium tert-butyl alcohol and palladium acetate as a catalyst,The reaction was heated to 80 C for 3 hours and then cooled to room temperature. The reaction was filtered,The filtrate was washed with dichloromethane and then the solvent was evaporated to dryness. The crude product was repeatedly washed with methanol and acetone,The product is obtained after purification by column chromatography.

With the complex challenges of chemical substances, we look forward to future research findings about 3939-23-9,belong thiazines compound

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Guo Jianhua; (12 pag.)CN106831645; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide

With the complex challenges of chemical substances, we look forward to future research findings about 154127-42-1,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, and cas is 154127-42-1, its synthesis route is as follows.,154127-42-1

Compound B (50.0 g, 140.7 mmol) was added to 450 mL of acetonitrile, trimethyl orthoacetate (27.0 g, 225.1 mmol) and triethylamine (1.4 g, 14.0 mmol) were added with stirring, and the mixture was heated to 78C. , stirring for 5h,HPLC monitoring showed complete reaction and the HPLC monitoring results are shown in Table 1 (see FIG. 1).Cool to 40C, distill off under reduced pressure, and concentrate to a minimum volume.Compound C crude product was obtained.The crude compound C was dissolved in 180 mL of tetrahydrofuran, cooled to -10 DEG C, triethylamine (31.3 g, 309.5 mmol) was slowly added dropwise at a drip rate of 1 d/s, and the addition was completed at a drip rate of 3 d/s. 4- A solution of tosyl chloride (53.5 g, 280.6 mmol) in 70 mL of tetrahydrofuran. After the addition, the temperature was controlled at -4C, and the reaction was complete after about 3 hours.At a controlled temperature of 10 C. or less, a 70% aqueous solution of ethylamine (361.0 g, 5.6 M) was slowly added dropwise at a rate of 5 d/s. After the addition, the temperature was kept stirring at 12C and the reaction was complete after about 15 hours.The mixture was concentrated under reduced pressure to 70-80 mL, and the temperature was lowered to 0C. The temperature was controlled below 30C, and concentrated hydrochloric acid (12 mol/L) was added dropwise to adjust the pH to 1 to 2, and then about 14 mL of concentrated hydrochloric acid (12 mol/L) was added. The mixture was stirred at room temperature for 1 hour. The reaction was extracted twice with methyl tert-butyl ether (2*250 mL). The organic phases were combined and extracted once with dilute hydrochloric acid (1 mol/L, 100 mL). Combine the aqueous phases, slowly add sodium bicarbonate solids, adjust the pH to 5-6, add 150 mL of water, and adjust the pH to 7-8 with 7% sodium bicarbonate solution. After adjustment, stir at room temperature for 15 h and slowly crystallize. After filtration, the filter cake was rinsed with 30 mL of water and the cake was dried to obtain 35.4 g of product with a purity of 98.3%.Add 250 mL of dichloromethane, 25 mL of methanol to the filter mother liquor, stir, extract, separate, and concentrate the organic phase to dryness4.6 g of yellow viscous material was added and 10 mL of ethyl acetate was added. Heat to 70 ~ 75 C dissolved, slowly dropped to 0 ~ 10 C, stirring 1 ~ 2h, precipitation of a white solid, continue stirring 3 ~ 4h, filtration, with 3mL water filter cake, filter cake drying,Obtained product 2.4g, purity 97.3%.Combined, the purity was 98.1%, the total yield was 65.3%, the ignition residue was 0.08%, and the chiral purity was 99.7%.

With the complex challenges of chemical substances, we look forward to future research findings about 154127-42-1,belong thiazines compound

Reference£º
Patent; Shandong Weizhi Pharmaceutical Co., Ltd.; Shanghai Weizhi Pharmaceutical Technology Co., Ltd.; Wang Jianhua; He Yigang; Wei Yanjun; Xing Yanping; Zhao Tianchang; (27 pag.)CN107759618; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on 3-Bromo-10H-phenothiazine

With the complex challenges of chemical substances, we look forward to future research findings about 3939-23-9,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is 3-Bromo-10H-phenothiazine, and cas is 3939-23-9, its synthesis route is as follows.,3939-23-9

Compound 1 was synthesized by the modification of the published method [18]. Sodium hydride(2.2 g, 53.9 mmol) was stirred with 3-bromo-10H-phenothiazine (10.0 g, 35.9 mmol, dissolved in dryDMF) for 30 min. Bromoethane (4.7 g, 43.1 mmol) was then added to the mixture and stirred for 10 hat room temperature in dark environment. After the reaction completed, water was added to react theremaining sodium hydride. White solid was precipitated and collected by vacuum filtration. The solidwas first washed with small amount of EA and then washed with n-hexane. 1H NMR (400 MHz,acetone-d6) 7.34 (dd, J = 8.7, 2.3 Hz, 1H), 7.28 (d, J = 2.3 Hz, 1H), 7.25-7.19 (m, 1H), 7.15 (dd, J = 7.6,1.5 Hz, 1H), 7.04 (dd, J = 8.3, 1.2 Hz, 1H), 6.99 (d, J = 1.2 Hz, 0H), 6.97 (s, 1H), 6.95 (s, 1H), 3.99 (q,J = 6.9 Hz, 2H), 1.38 (t, J = 6.9 Hz, 3H).

With the complex challenges of chemical substances, we look forward to future research findings about 3939-23-9,belong thiazines compound

Reference£º
Article; Lao, Hio Kuan; Tan, Jingyun; Wang, Chunfei; Zhang, Xuanjun; Molecules; vol. 24; 19; (2019);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate

With the complex challenges of chemical substances, we look forward to future research findings about 188614-01-9,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, and cas is 188614-01-9, its synthesis route is as follows.,188614-01-9

A. (3,4-Dihydro-2H-benzo[1,4]thiazin-6-yl)-methanol. To a solution of 3-oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (750 mg, 3.4 mmol) in Et2O (32 mL) was added LiAlH4 (240 mg, 6.3 mmol) and the resulting suspension was stirred at RT for 24 h. The reaction mixture was cooled to 0 C. and treated with H2O (0.5 mL), 15% aq. NaOH (0.5 mL), and H2O (1.5 mL). The resulting suspension was filtered. The filtrate was concentrated to provide 340 mg (58%) of the title compound as an amber oil. MS (ESI): exact mass calculated for C9H11NOS, 181.06; m/z found, 182.1 [M+H]+. 1H NMR (500 MHz, CDCl3): 6.96 (d, J=7.9, 1H), 6.60 (dd, J=7.9, 1.6, 1H), 6.49 (d, J=7.9, 1H), 4.52 (s, 2H), 3.65-3.62 (m, 2H), 3.06-3.04 (m, 2H).

With the complex challenges of chemical substances, we look forward to future research findings about 188614-01-9,belong thiazines compound

Reference£º
Patent; Allison, Brett D.; Gomez, Laurent; Grice, Cheryl A.; Hack, Michael D.; Morrow, Brian J.; Motley, S. Timothy; Santillan, Alejandro; Shaw, Karen J.; Schwarz, Kimberly L.; Tang, Liu Y.; Venkatesan, Hariharan; Wiener, John J. M.; US2006/223810; (2006); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on 3-Bromo-10H-phenothiazine

With the complex challenges of chemical substances, we look forward to future research findings about 3939-23-9,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is 3-Bromo-10H-phenothiazine, and cas is 3939-23-9, its synthesis route is as follows.,3939-23-9

To a stirred solution of 3-bromo-1OH-phenothiazine(1 8 g, 64.72 mmol) in DIVIF (100 mL) was added sodium hydride (3.8 g, 97.08 mmol) at 0 C in small portions and the reaction mixture was stirred at 0 C for 15 mins. To the reaction mixture was added 3-bromo chloropropane (12.2 g,77.66 mmol) at 0 C and stirring continued at room temperature for 1 h. The reaction wasquenched with aq.NH4C1 solution, extracted with EtOAc, organic layer is washed with brine, dried over anhydrous sodiumsulphate, and concentrated. The crude product (20 g) was as such taken for the next step without further purification: MS (ESI) m/z3 55 (M+2H).

With the complex challenges of chemical substances, we look forward to future research findings about 3939-23-9,belong thiazines compound

Reference£º
Patent; BIOIMICS AB; KIRSEBOM, Leif; UPADHAYAYA, Ram Shankar; KETHIRI, Raghava Reddy; VIRTANEN, Anders; (308 pag.)WO2017/222466; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on 2-(3-Methoxypropyl)-4-oxo-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide

With the complex challenges of chemical substances, we look forward to future research findings about 154127-41-0,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is 2-(3-Methoxypropyl)-4-oxo-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, and cas is 154127-41-0, its synthesis route is as follows.,154127-41-0

Step I: (S)-3,4-Dihydro-4-hydroxy-2-(3-methoxy)propyl-2H-thieno[3,2-e]-1,2-thiazine-6-sulfonamide-1,1-di oxide To a solution of the product of Step H (2.6 g, 7.34 mmol) in THF (30 mL) at -78 C. was added a solution of (+)-beta-chlorodiisopinocampheylborane (11.8 g, 36.7 mmol) in THF (10 mL). The reaction mixture was allowed to warm to -20 C. and kept at this temperature for 4 days. Diethanolamine (4.2 mL, 44 mmol) was added to the reaction mixture and the solution stirred for 30 min, diluted with EtOAc (150 mL), washed with water (2*50 mL) and brine (2*50 mL), dried (MgSO4), and evaporated to a syrup which was purified by column chromatography [silica; CH30 OH/CH2 Cl2 (20:1)] to give 2.4 g (92%) of the desired compound as a colorless foam.

With the complex challenges of chemical substances, we look forward to future research findings about 154127-41-0,belong thiazines compound

Reference£º
Patent; Alcon Laboratories, Inc.; US5378703; (1995); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide

With the complex challenges of chemical substances, we look forward to future research findings about 154127-42-1,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, and cas is 154127-42-1, its synthesis route is as follows.,154127-42-1

Compound (VII) (112g, 0.313 mol) was suspended in tetrahydrofuran (10 vol). Methanesulfonic anhydride (65.7g, 0.374 moles) was added in one lot and stirred. The reaction mixture was cooled to 0-50C and pyridine (2.5 vol) was added slowly over a period of 45 minutes. The reaction was monitored by TLC [Mobile phase dichloromethane: methanol, 9.5:0.5] for completion. As reaction product the intermediate compound (Vila) was obtained.To the above reaction mixture 70% aqueous ethylamine solution (400 ml, 10 vol) was added slowly at 0-5C. After the complete addition, the reaction mixture was stirred at 25-300C for 12.0 h. The reaction is monitored by TLC [Mobile phase dichloromethane: methanol, 9.5:0.5] for completion. The organic layer (ethylamine and tetrahydrofuran mixture) was distilled off completely below 500C under reduced pressure. The aqueous phase was acidified with concentrated hydrochloric acid and the pH adjusted to 3.0 at 15-25C. The aqueous phase was extracted with t-butyl methyl ether twice (2 x 2.0 vol) to remove any organic impurities if present. The t-butyl methyl ether layer was extracted with 1 N HCI solution and the layers separated.The aqueous layers were combined, treated with activated charcoal and heated at 65-700C. The contents were stirred at 65-700C for 30 minutes, filtered through hyflo supercel at 65-700C and washed with preheated water(65-700C). The filtrate was cooled to 25-30C and the pH was adjusted to 8 with solid sodium bicarbonate. The reaction mixture was stirred for 12 h for crystallization. If the crystallization did not occur, the reaction mass was filtered through a Bchner funnel, extracted with ethyl acetate (3 x 5.0 vol), dried over sodium sulphate and filtered. The organic layer was distilled completely (below 500C) under reduced pressure. The crude product was obtained as a pale yellow syrup, which was washed with hexane (4 x 1.0 vol) to yield a residue which crystallized to a solid on standing.Yield of crude compound (VIIl): 8Og (66.3%)

With the complex challenges of chemical substances, we look forward to future research findings about 154127-42-1,belong thiazines compound

Reference£º
Patent; AZAD PHARMACEUTICAL INGREDIENTS AG; RAMAKRISHNAN, Arul; SONI, Anil Kumar; ADHIKARI, Sujit Das; RAO, Kommula Srinivasa; PAUL, Soumendu; SRINIVASULU, Ganta; WO2010/103115; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Some tips on 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid

With the complex challenges of chemical substances, we look forward to future research findings about 272437-84-0,belong thiazines compound

As a common heterocyclic compound, it belongs to thiazines compound, name is 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, and cas is 272437-84-0, its synthesis route is as follows.,272437-84-0

Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(7- methoxy-quinoxalin-2-ylsulfanyl)-ethvH-piperidin-4-vU -methyl-amide: 3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (26 mg, 0.11 mmol, 1.0 eq) is added at room temperature to a stirred solution of {l-[2-(7-methoxy-quinoxalin-2- ylsulfanyl)-ethyl]-piperidin-4-yl}-methyl-amine (40 mg, 0.11 mmol, 1.0 eq) in N,N- dimethylformamide (3 mL), followed by O-(7-azabenzotriazol-l-yl)-iV,iV,N’,N’- tetramethyluronium hexafluorophosphate (45 mg, 0.11 mmol, 1.0 eq), and triethylamine (16 muL, 0.11 mmol, 1.0 eq). After 4 hours stirring at room temperature, solvent is evaporated and the residue is purified by preparative EtaPLC to afford 3-oxo-3,4-dihydro-2H- benzo[l,4]thiazine-6-carboxylic acid {l-[2-(7-methoxy-quinoxalin-2-ylsulfanyl)-ethyl]- piperidin-4-yl} -methyl-amide as a yellow solid (22 mg, 35% yield).MS m/z (+ESI): 524.3 [M+Eta]”

With the complex challenges of chemical substances, we look forward to future research findings about 272437-84-0,belong thiazines compound

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

Downstream synthetic route of 1,2-Thiazinane 1,1-dioxide

With the complex challenges of chemical substances, we look forward to future research findings about 1,2-Thiazinane 1,1-dioxide,belong thiazines compound

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO248,mainly used in chemical industry, its synthesis route is as follows.,37441-50-2

Step2 A strong glass tube was charged with Pd2(dba)3 (6.4 mg; 0.007 mmol), xantphos (12 mg; 0.02 mmol), 1,2-thiazinane-1,1-dioxide (115 mg; 0.85 mmol), and Cs2CO3 (323 mg; 0.99 mmol).The tube was capped with a rubber septum, evacuated and backfilled with nitrogen. 6-Bromo-1-methyl-1H-indole carboxylic acid ethyl ester (200 mg; 0.71 mmol) in 1 ml of 1,4-dioxane was added through the septum.The septum was replaced with a Teflon screwcap.The tube was sealed, and the mixture was stirred at 100 C. for 64 hours.The reaction mixture was cooled to room temperature, diluted with ethyl acetate (10 ml), filtered, and concentrated in vacuo.The crude material was purified by flash chromatography (silica gel, ethyl acetate-hexane 1:1) to afford 190 mg (66%; m/z 337) of colorless crystals.This compound was dissolved in a mixture of tetrahydrofuran (4 ml), methanol (2 ml) and water (1 ml).To this solution was added dropwise LiOH monohydrate (95 mg; 2.26 mmol) dissolved in 1 ml water and the mixture was stirred at room temperature for 16 h.The reaction mixture was partition between ethyl acetate and water.The aqueous layer was acidified with 2N HCl to ph ~3-4 and extracted with ethyl acetate.The organic layer was washed with brine and dried (Na2SO4) and evaporated in vacuo.Yield 131 mg of 6-(1,1-Dioxo-1lambda6-[1,2]thiazinan-2-yl)-1-methyl-1H-indole-2-carboxylic acid as a white powder (75%); m/z 307.

With the complex challenges of chemical substances, we look forward to future research findings about 1,2-Thiazinane 1,1-dioxide,belong thiazines compound

Reference£º
Patent; Bamberg, Joe Timothy; Gabriel, Tobias; Krauss, Nancy Elisabeth; Mirzadegan, Taraneh; Palmer, Wylie Solang; Smith, David Bernard; US2004/77646; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem