Day: September 14, 2020

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64percent) and ortho-3a (34 mg, 21percent) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

272437-84-0 A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The acid (a) in tetrahydrofuran (50 ml) and triethylamine (4.7 ml) was cooled to [0C] and [ISOBUTYLCHLOROFORMATE] (4.02 ml) was added dropwise and the solution was stirred at [0C] for 2 hours, when it was filtered into a stirred solution of sodium borohydride (3.14 g) in ice/water (50 ml). The mixture was stirred at [0C] for 1 hour and allowed to warm to room temperature. It was acidified with 2M hydrochloric acid, evaporated to half volume, and the resulting product was collected, washed with water and dried in vacuo, to give a white solid (4.5 g). MS (-ve ion electrospray) [M/Z] 194 (M-H)-

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,its application will become more common.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/2992; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, A solution of2- (trifluoromethyl)-lOH-phenothiazine (2.04g, 7.6mmol) and DMF (16mL) was mixed with CS2C03 (7.5g, 22.9mmol) and l-bromo-3-chloropropane (1.1 mL, 11.5mmol). The reaction mixture was heated at 65 C for 12h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi l00mL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSO iota, and concentrated to afford the title compound.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 188614-01-9

3-QxQ-3, 4-dihydro-2H-benzo [1, 48thiazine-6-carboxylic acid methyl ester (6.74g) was suspended in tetrahydrofuran (lOOmL) and 2M sodium hydroxide (30mL) was added followed by water (20mL). The solution was stirred for 2.5 hours, evaporated to half volume and acidified with 2M hydrochloric acid. The product was collected, washed with water and dried in vacuo, to give a white solid (6.2g). MS (-ve ion electrospray) m/z 208 (M-H)-

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate,its application will become more common.

Reference£º
Patent; SMITHKLINE BEECHAM P.L.C.; WO2003/87098; (2003); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 3080-99-7

To a round bottom flask charged with compound 16-1 (151 mg, 1.0 mmol) and methyl 4-(bromomethyl)benzoate (228 mg, 1.0 mmol) in DMF (5 mL) was added K2CO3 (276 mg, 2.0 mmol). The resulting mixture was allowed to stir for 2 h at 80 C. The mixture was cooled to room temperature and after addition of water (15 mL) extracted with EtOAc (3 x 15 mL). The combined organic extracts were washed with brine (20 mL), dried over sodium sulfate, and concentrated under vacuum. The crude product was purified by flash chromatography (0 – 50% EtOAc/hexanes) to afford as colorless oil (110 mg, 37%).1H NMR (CDCI3) delta 8.00, 7.33 (AlphaAlpha’ChiChi’ multiplet, AX + J AX = 8.4 Hz, 4H), 7.08 (dd, / = 7.7 Hz, 1.5 Hz, 1H), 6.90 (incompletely resolved ddd approaching dt, average of two larger / = 7.8 Hz, additional / = 1.1 Hz, 1H), 6.63 (incompletely resolved ddd approaching dt, average of two larger / = 7.5 Hz, additional / = 0.8 Hz, 1H), 6.54 (dd, 7 = 8.3 Hz, 0.7 Hz, 1H), 4.57 (s, 2H), 3.90 (s, 3H), 3.69, 3.08 (AlphaAlpha’ChiChi’ multiplet, AX + J AX = 10.4 Hz, 4H). 13C NMR (CDCI3) delta 166.9, 143.8, 143.4, 130.1 (2C), 129.1, 128.0, 126.6 (2C), 126.1, 118.0, 117.8, 113.2, 56.3, 52.1, 50.6, 25.9. ESI LRMS: [M+H]+, mlz 300.2.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine,its application will become more common.

Reference£º
Patent; THE BOARD OF TRUSTEES OF THE UNIVERSITY OF ILLINOIS; KOZIKOWSKI, Alan; SHEN, Sida; BERGMAN, Joel; (100 pag.)WO2017/142883; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 37441-50-2,1,2-Thiazinane 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37441-50-2

A stirred mixture of methyl 6-BROMO-3-HYDROXYPYRIDINE-2-CARBOXYLATE (6.15 g, 26.5 mmol), 8-sultam (described in WO 02/30931-A2, Merck & Co. , Inc. , 2002) (3. 98 g, 29.4 mmol) and copper (I) oxide (5.75 g, 40.2 mmol) in anhydrous pyridine (100 mL) was heated at 130 C, under argon, for 6 h. The mixture was cooled, and the pyridine removed under reduced pressure. The residue was treated with CH2C12 (400 mL) and EDTA (0.35 M in H20, 300 ML, 105 mmol) and air was bubbled into the mixture for 18 h. The mixture was filtered through a pad of celite and the aqueous layer was saturated with solid NACI and extracted with CH2CLZ (4 x 250 mL). The combined organic extracts were dried (NA2S04), filtered, and concentrated in vacuo to afford a crude oil. The oil was dissolved in MEOH (400 mL) and conc. H2S04 (2 ML) and heated to reflux for 18 h, then allowed to cool to ambient temperature. Most of the solvent was removed in vacuo and the residual mixture was partitioned between CHZCLX (400 mL) and saturated NAHCO3 (400 mL). The aqueous layer was extracted further with CH2Cl2 (2 x 250 mL) and the combined organic extracts were dried (NA2S04), filtered, and concentrated in vacuo to afford a crude sample of the product. This crude product was partially purified by silica gel chromatography, eluting with a gradient of CH2C12 : MEOH-100 : 0 to 95: 5 to give a yellow solid that was crystallized from MEOH to afford the title compound as a pale yellow solid of sufficient purity for use in the next step. MS: FALZ = 287 (M + 1).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,2-Thiazinane 1,1-dioxide,37441-50-2,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2005/9962; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 38642-74-9,2-Cyano-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 38642-74-9

2-cyanophenothiazine (0.74 g, 3.30 mmol) was dissolved in 10 mL of anhydrous DMF. The mixture was cooled to 0 C and 60 % NaH (0.40 g, 9.90 mmol) was added. The dark mixture was stirred at 0 C for an additional 15 mm and Di-tert-butyl dicarbonate (0.90 g, 3.96 mmol) was added. The mixture was stirred at room temperature for 3 h and was diluted with 50 mL of brine. The aqueous layer was extracted with three 25 mL portions of ethyl acetate. The combined organic extract was dried over anhydrous MgSO4 and concentrated under diminished pressure. The crude was purified on a silica gel column (10 cm x 2 cm). Elution with ethyl acetate-hexane (1:9) gave 1 as a pale yellow solid: yield 1.07 g (100%); silica gel TLC R10.26 (ethyl acetate-hexane 1:9); ?HNIVIR (CDC13) 51.49 (s, 9H), 7.16-7.20 (m, 1H), 7.28-7.33 (m, 2H), 7.40 (s, 2H), 7.49 (d, 1H, J= 8.4 Hz) and 7.80 (s, 1H); ?3CI?IvIR 28.1, 83.1, 110.2, 118.2, 126.6, 127.2, 127.3, 127.5, 128.1,129.1, 130.3, 130.6, 137.7, 139.0, 139.1 and 151.8; mass spectrum (APCI), m/z 325.1017 (M+H) (C18H17N202S requires m/z 325.1011).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-Cyano-phenothiazine,38642-74-9,its application will become more common.

Reference£º
Patent; ARIZONA BOARD OF REGENTS ON BEHALF OF ARIZONA STATE UNIVERSITY; HECHT, Sidney; KHDOUR, Omar; CHOWDHURY, Sandipan, Roy; BANDYOPADHAY, Indrajit; (85 pag.)WO2016/133995; (2016); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 188614-01-9

At 40 in to methyl-3-oxo-3,4-dihydro -2H-1,4- benzothiazine-6-carboxylate (475mg, 2.00mmol), borohydride the mixture of sodium (151mg, 3.99mmol) in tetrahydrofuran (2.0mL) dropwise addition of methanol (640mg). After stirring for 1 hour at 40 , under ice-cooling, use 1mol / L diluted hydrochloric acid, and extracted with ethyl acetate. The combined organic layers were dried over sodium sulfate, filtered, concentrated, and the use of silica gel column chromatography (hexane: ethyl acetate = 1: 1) and the residue was purified to obtain the title compound (130mg, 31%) .

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate,its application will become more common.

Reference£º
Patent; SUMITOMO DAINIPPON PHARMA CO., LTD.; YOSHINAGA, HIDEFUMI; URUNO, YOSHIHARU; SAWAMURA, KIYOTO; GOTO, NANA; IKUMA, YOHEI; (165 pag.)TW2016/5858; (2016); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, Step a 4-(3′-indolyl)-1-[1″-(2′”-trifluoromethyl-10′”-phenothiazinyl)-2″-methyl-3″-propionyl]-piperidine hydrochloride 27 g of 2-trifluoromethyl-phenothiazine and 12 g of alpha-methylacryloyl chloride in 100 ml of toluene were 1 for 2 hours and the mixture was evaporated to dryness. The residue was chromatographed over silica gel and elution with a 1– 1 benzene-cyclohexane mixture gave 18 g of 2-trifluoromethyl-10-(alpha-methyl acryloyl)-phenothiazine in the form of white crystals melting at 103¡ãC.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 3080-99-7,3,4-Dihydro-2H-benzo[b][1,4]thiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 3080-99-7

In a manner similar to the method described in Example 1-1, using 3,4-dihydro-2H-benzo[1,4]thiazine in place of 1,2,3,4-tetrahydroquinoline, 239 mg (yield: 63%) of the captioned compound was obtained.1H-NMR (ppm) (300 MHz, CDCl3) 6.98 (1H, dd, J = 1.8, 7.9 Hz), 6.86 (1H, ddd, J = 1.8, 7.3, 8.5 Hz), 6.78 (1H, d, J = 8.2 Hz), 6.69-6.65 (2H, m), 6.61-6.5 (1H, ddd, J = 1.2, 7.6, 8.5 Hz), 4.61 (1H, d, J = 8.2 Hz), 3.85 (3H, s), 3.60-3.51 (3H, m), 3.14-2.96 (4H, m), 2.55-2.50 (1H, m), 2.41 (3H, s), 2.38-2.32 (1H, m), 2.23-2.12 (2H, m), 1.91-1.47 (5H, m), 1.12-1.00 (1H, m) IR (cm-1) (KBr) 2924, 1735, 1606, 1584, 1483, 1438, 1373, 1338, 1275, 1257, 1176, 1148, 1112, 1079, 1047, 1006, 937, 907, 891, 854, 793, 744

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3,4-Dihydro-2H-benzo[b][1,4]thiazine,3080-99-7,its application will become more common.

Reference£º
Patent; TORAY INDUSTRIES, INC.; EP1555266; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem