Month: August 2020

Name is 3,4-Dihydro-2H-benzo[b][1,4]thiazine, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 3080-99-7, its synthesis route is as follows.,3080-99-7

Example 9: Synthesis of 2- (2, 3-DIHYDROBENZOLL, 4] thiazin-4-ylmethyl)-1, 1, 1-TRIFLUORO-4- (5- fluoro-2-methoxyphenyl)-4-methylpentan-2-ol A solution of 2- [2- (5-fluoro-2-methoxyphenyl)-2-methylpropyl]-2-trifluoromethyloxirane (118 mg) and 3, 4-dihydro-2H-1, 4-benzothiazine (H. I. EL-SUBBAGH et AL., Arch. Pharm. Med. Chem., 1999, 332, pp. 19-24) (122 mg) in dimethylformamide (1 mL) was heated at 140C for 73 hours. The resulting mixture was diluted with diethyl ether, washed with saturated aqueous sodium bicarbonate, water and brine, dried over magnesium sulfate, filtered, and concentrated in vacuo. The residue was purified by radial chromatography with a chromatotron (eluted with 0% to 1% ethyl acetate-hexanes) to give the title compound as a white solid (53.5 mg), m. p. 103C-104C.

With the complex challenges of chemical substances, we look forward to future research findings about 3,4-Dihydro-2H-benzo[b][1,4]thiazine

Reference£º
Patent; BOEHRINGER INGELHEIM PHARMACEUTICALS, INC.; WO2004/63163; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 2-Chloro-10H-phenothiazine, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 92-39-7, its synthesis route is as follows.,92-39-7

(1) Dehydration reaction: 2-chlorophenothiazine, cuprous cyanide, catalyst, quinoline, p-toluenesulfonyl chloride according to moleThe ratio is 1:1.25:0.15:5:0.1 is added to the reactor, and the temperature is raised to 120 C for dehydration reaction, the reaction is 1 hour, and the water is dehydrated to a moisture content of less than 0.1%;The catalyst is a mixture of sodium iodide and lithium iodide, and the molar ratio of sodium iodide to lithium iodide is 1:0.3;(2) Preparation of crude 2-cyanophenothiazine: the temperature of the reactor was raised to 230 C, and the reaction was carried out for 15 hours;(3) Separation of crude 2-cyanophenothiazine: the reactor temperature was lowered to 90 C, and 8 times was added to the reactor.The total amount of moles of the starting material is water, the solid is precipitated and filtered, and the product is extracted with ethyl acetate and concentrated to dryness to give a crude 2-cyanophenothiazine;(4) Purification of 2-cyanophenothiazine: a crude 2-cyanophenothiazine is placed in a mixed solvent of toluene and methanol,The volume ratio of toluene to methanol in the mixed solvent was 1:0.15, the temperature was raised to 120 C for 30 minutes, and the mixture was cooled to 20 C, and the precipitated solid was filtered to obtain 2-cyanophenothiazine.After testing, the yield of 2-cyanophenothiazine prepared in this example was 92.6%, and the purity of the product was 99.61%.The content of the amide was 0.03%.

With the complex challenges of chemical substances, we look forward to future research findings about 2-Chloro-10H-phenothiazine

Reference£º
Patent; Ningbo Jinuo Chemicals Co., Ltd.; Peng Zhigang; Yue Mingxin; Qu Qiangzheng; (8 pag.)CN105175355; (2018); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 1,2-Thiazinane 1,1-dioxide, and cas is 37441-50-2, its synthesis route is as follows.,37441-50-2

To a mixture of 2,4-difluorobenzonitrile (10.0 g, 72 mmol) and 1,1-dioxo-1?6-[1,2]thiazin-2-ane (8.84 g, 65.4 mmol) in 1:1 tetrahydrofuran/dimethylformamide (40 mL) was added potassium carbonate (9.0 g, 65.4 mmol). The mixture was stirred at 90 C. for 18 h then filtered and concentrated. The residue was purified by flash chromatography (SiO2) eluting with 10%-50% ethyl acetate/hexanes followed by recrystallization from hot ethyl acetate/hexane to give the title compound as white needles (0.537 g, 3% yield). 1H NMR (500 MHz, CD3OD) ? ppm: 7.70 (1H, dd, J=8.8, 5.8 Hz), 7.30 (1H, dd, J=8.8, 2.4 Hz), 7.15-7.12 (1H, m), 3.27 (2H, t, J=5.3 Hz), 3.33 (2H, t, J=6.1 Hz), 2.40-2.35 (2H, m), 2.05-2.01 (2H, m). LCMS (M+H) calcd for C11H16N2OF: 255.06; found: 255.19.

With the complex challenges of chemical substances, we look forward to future research findings about 1,2-Thiazinane 1,1-dioxide

Reference£º
Patent; Naidu, B. Narasimhulu; Banville, Jacques; Beaulieu, Francis; Connolly, Timothy P.; Krystal, Mark R.; Matiskella, John D.; Ouellet, Carl; Plamondon, Serge; Remillard, Roger; Sorenson, Margaret E.; Ueda, Yasutsugu; Walker, Michael A.; US2005/267105; (2005); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

2-Methoxyphenothiazine, cas is 1771-18-2, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,1771-18-2

38.1) 2-Methoxy-10H-phenothiazine-1-carbaldehyde: 4.6 g (20 mmol) of 2-methoxy-10H-phenothiazine are dissolved, under an argon atmosphere, in a three-necked flask, containing 140 ml anhydrous ethyl ether. 20 ml (50 mmol) of a solution of nBuLi (2.5 M) in hexane is then added dropwise, at 20 C. The reaction mixture is agitated for 3 hours at 20 C. before the dropwise addition of 6.2 ml (80 mmol) of anhydrous DMF. Agitation is maintained for another 15 hours at 20 C. The whole is then poured into 150 ml ice-cooled water and the product is extracted twice using 200 ml of ethyl acetate. The organic solution is washed with 100 ml of salt water, dried over MgSO4, filtered and concentrated under vacuum. The evaporation residue is taken up in diisopropyl ether, filtered and dried to produce a red solid with a yield of 30%. Melting point: 155-160 C.

1771-18-2 is used more and more widely, we look forward to future research findings about 2-Methoxyphenothiazine

Reference£º
Patent; Societe de Conseils de Recherches et d’Applications Scientifiques (S.C.R.A.S.); US6482822; (2002); B1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, cas is 154127-42-1, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,154127-42-1

To a solution of IX (41 g, 0.12 moles) and triethylamine (33 ml. 0.24 moles) in anhydrous tetrahydrofuran (615 ml) cooled to 0 to 5 C. was added a solution of tosyl chloride (44 g, 0.24 moles) in tetrahydrofuran (205 ml). The mixture was allowed to warm to room temperature and stirred for 18 hours. The reaction mixture was cooled to 0 to 5 C. and ethylamine gas was purged from its 70% aqueous solution (365 ml) below 10 C. Reaction mixture was allowed to attain ambient temperature and stirred for 36 hours. The reaction mixture was concentrated and ethyl acetate (615 ml) was added to it. Further the organic layer was washed with water (410 ml). The concentrated ethyl acetate layer and MDC (615 ml) was added followed by cooling to temperature 0 to 5 C. and 6M hydrochloric acid (600 ml) was added. The reaction mixture was stirred for 1 h at 15 to 20 C. Aqueous layer was washed with MDC (205 ml). pH of the aqueous solution was adjusted to 8 using sodium bicarbonate solution causing white solid to precipitate which was extracted with ethyl acetate (2*410 ml). The ethyl acetate layer was evaporated to dryness to yield crude Brinzolamide (29 g, 66%). Material was recrystallized from ethanol. [Purity: greater than 99.5%, m.p. 125-127 C.]

154127-42-1 is used more and more widely, we look forward to future research findings about (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide

Reference£º
Patent; Sathe, Dhananjay Govind; Tarur, Radhakrishnan Venkatasubramanian; Bhise, Nandu Baban; Shinde, Ajit Bhaskar; Pardeshi, Santosh; US2010/9977; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, cas is 272437-84-0, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,272437-84-0

B. 6-Hydroxymethyl-4H-benzo[1,4]thiazin-3-one. To a 0 C. suspension of 3-oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid (400 mg, 2 mmol) in THF (19 mL) was added Et3N (0.32 mL, 2 mmol) and the resulting solution was treated with iso-butylchloroformate (0.3 mL, 2 mmol). The resulting suspension was stirred at 0 C. for 2 h, filtered and the solid was washed with THF. The filtrate was cooled to 0 C., treated with NaBH4 (150 mg, 4.3 mmol) and slowly treated with H2O (10 mL). The resulting suspension was, warmed to RT and stirred for 18 h. The suspension was neutralized using 1 N HCl and diluted with H2O (100 mL). The organic layer was extracted with EtOAc (3*200 mL). The combined organic layers were dried (MgSO4), filtered and concentrated. The resulting residue was purified on SiO2 (0-10% CH3OH/CH2Cl2) to provide 330 mg (89%) of the title compound as a white solid. MS (ESI): exact mass calculated for C9H9NO2S, 195.04; m/z found, 196.1 [M+H]+. 1H NMR (500 MHz, CD3OD): 7.26 (d, J=7.9, 1H), 7.01-6.98 (m, 2H), 4.55 (s, 2H), 3.40 (s, 2H).

272437-84-0 is used more and more widely, we look forward to future research findings about 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid

Reference£º
Patent; Allison, Brett D.; Gomez, Laurent; Grice, Cheryl A.; Hack, Michael D.; Morrow, Brian J.; Motley, S. Timothy; Santillan, Alejandro; Shaw, Karen J.; Schwarz, Kimberly L.; Tang, Liu Y.; Venkatesan, Hariharan; Wiener, John J. M.; US2006/223810; (2006); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

1,2-Thiazinane 1,1-dioxide, cas is 37441-50-2, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,37441-50-2

(39) A mixture of 5-chloro-N-((1-(4-iodophenyl)-1H-imidazol-4-yl)methyl)thiophene-2-carboxamide 1-6 (56 mg, 0.10 mmol), 1,4-butanesultam (52 mg, 0.38 mmol), 8-hydroxyquinoline (6 mg, 0.040 mmol) and K2CO3 (50 mg, 0.36 mmol) in DMSO (1 mL) was degassed before being charged with CuI (10 mg, 0.052 mmol). The mixture in a sealed tube was heated at 130 C. overnight. The mixture was then purified by HPLC to give the titled compound (10 mg). MS 451.1 and 453.1 (M+H, Cl pattern).

With the rapid development of chemical substances, we look forward to future research findings about 1,2-Thiazinane 1,1-dioxide

Reference£º
Patent; Millennium Pharmaceuticals, Inc.; US2007/259924; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3,4-Dihydro-2H-benzo[b][1,4]thiazine, cas is 3080-99-7, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,3080-99-7

(3d) Potassium carbonate (5.2 g, 37.7 mmol) and methyl 4-(bromomethyl)benzoate (2.8 g, 12.6 mmol) were added to a solution of (3c) (1.9 g, 12.6 mmol) in 20 mL of anhydrous DMF. The reaction mixture was heated to 80 C. overnight. After cooling to rt, the solid was filtered off and rinsed with DMF. The filtrate was concentrated in vacuo and the residue was purified on silica gel column to provide methyl 4-(2,3-dihydro-4H-1,4-benzothiazin-4-ylmethyl)benzoate (3.02 g, 80%).

With the rapid development of chemical substances, we look forward to future research findings about 3,4-Dihydro-2H-benzo[b][1,4]thiazine

Reference£º
Patent; Duan, Jingwu; Jiang, Bin; Chen, Lihua; Lu, Zhonghui; Barbosa, Joseph; Pitts, William J.; US2003/229084; (2003); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

(S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide, cas is 154127-42-1, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,154127-42-1

Prepare a 1L three-vial bottle equipped with a mechanical stirrer, a constant pressure dropping funnel, and an ice water bath.Added compound of formula A (50 g, 0.14 mol) and acetonitrile (250 mL),Under N2 protection, stirring and cooling to 5 ~ 10 C,Then DMF-DMA (17.5 g, 0.147 mol) was added dropwise thereto.The rate of addition is such that the stability of the system does not exceed 15C.After the addition, cooling was removed and the reaction was continued for 1 hour. TLC detected the disappearance of the starting material.Concentrate at normal pressure, recover the solvent and add the residue to DCM.Rotary evaporation is replaced by desolvation, and the mixture is finally dried under high vacuum for 1 hour. The residue is the compound of formula B-2.Can be directly after the subsequent reaction without purificationThe crude product B-2 was obtained in equivalent yield.

With the rapid development of chemical substances, we look forward to future research findings about (S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e][1,2]thiazine-6-sulfonamide 1,1-dioxide

Reference£º
Patent; Shanghai Bo Shirui Life Technology Co., Ltd.; Wang Dong; Wang Fangdao; Wang Meng; Cai Maojun; (16 pag.)CN107722043; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, cas is 272437-84-0, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,272437-84-0

Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(6- methoxy-quinolin-3-ylsulfanyl)-ethyll-piperidin-4-vU -amide: 3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (21 mg, 0.09 mmol, 1.0 eq) is added at room temperature to a stirred solution of l-[2-(6-methoxy-quinolin-3-ylsulfanyl)- ethyl]-piperidin-4-ylamine (30 mg, 0.09 mmol, 1.0 eq) in N,N-dimethylformamide (3 mL), followed by 1-hydroxybenzotriazole (13 mg, 0.10 mmol, 1.1 eq), N-Q- dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (20 mg, 0.10 mmol, 1.15 eq) and N,N-diisopropylethylamine (35 muL, 0.20 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 5 mL) and water (5 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a residue that is purified by preparative EtaPLC to afford 3-oxo-3,4- dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid {l-[2-(6-methoxy-quinolin-3- ylsulfanyl)-ethyl]-piperidin-4-yl} -amide as a white solid (30 mg, 59% yield).1H-NMR (400 MHz, DMSO-t/6) delta ppm: 11.65 (s, IH), 8.65 (d, J = 2.5 Hz, IH), 8.20-8.25 (m, 2H), 7.88 (d, J = 8.8 Hz, IH), 7.30-7.45 (m, 5H), 3.93 (s, 3H), 3.75 (m, IH), 3.50 (s, 2H), 3.29 (t, J = 7.0 Hz, 2H), 2.95 (m, 2H), 2.66 (t, J = 7.0 Hz, 2H), 2.11 (m, 2H), 1.78 (m, 2H), 1.58 (m, 2H). MS m/z (+ESI): 509.3 [M+H]+.

With the rapid development of chemical substances, we look forward to future research findings about 3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem